[U-Boot] [linux-sunxi] [UBOOT NAND] [PATCH 0/4] Add nand reading support to u-boot

Hans de Goede hdegoede at redhat.com
Mon Jan 5 14:08:38 CET 2015


Hi,

On 02-01-15 09:53, Daniel Kochmański wrote:
> This is a series of patches to enable nand read functionality on sunxi
> devices. It uses DMA and is able to read from syndrome partitions and
> normal ones. Additionaly mksunxiboot tool is patched to be able to
> format resulting binary to be able to read from BROM, so NAND SPL builds
> are now possible. a20_nandread command is added for conveniance.
>
> Afaik DMA controller doesn't vary between a10 and a20, so this should
> work on a10 devices, but due to no a10 hardware it wasn't tested.

First of all many thanks for working on this!

I see that this is against linux-sunxi/u-boot-sunxi.git, that is not
(really) being actively developed anymore, see:

https://www.marshut.net/kuispp/linux-sunxi-u-boot-sunxi-is-no-longer-supported-time-to-switch-to-upstream-u-boot.html

Can you please rebase on top of upstream u-boot, on top of the next
branch: http://git.denx.de/?p=u-boot/u-boot-sunxi.git;a=shortlog;h=refs/heads/next ?

Your patches all seem to only have a subject and not a proper commit message,
please add a commit message to all of them describing the changes in somewhat
more detail then you do in the subject, you could e.g. re-use bits of your
coverletter. Also for upstream u-boot we require a Signed-off-by as part of the
commit message, so please add a line like this one to all your commit messages:

Signed-off-by: Daniel Kochmański <dkochmanski at antmicro.com>

You can make git do this automatically by specifying the -s option when committing,
also please send further versions of this patch-set to the upstream u-boot
list.

Besides all the above, which is easily fixed, unfortunately we also have the problem
(or luxury) that Yassin Jaffer (added to the CC) has also been working on nand support,
re-using the upstream kernel code Boris Brezillon has been working on, see:

https://github.com/yassinjaffer/u-boot/commits/sunxi-nand

I believe that Yassin's version is better then yours because it re-uses existing
nand infrastructure rather then more or less starting from scratch.

But Yassin has not been very active on this, and has been reluctant to submit
his work upstream because it has not been tested a lot yet.

The best way forward may very well be you picking up Yassin's work (in coordination
with Yassin), and submitting that to upstream u-boot.

Yassin, I notice that the patches in your git repo do not have a Signed-off-by,
can you please reply to this mail with your Signed-off-by to indicate that it is
ok for us to add your Signed-off-by to your patches ?

Regards,

Hans





>
> Daniel Kochmański (4):
>    sunxi: nand: add minimal nand driver (reading flash only).
>    sunxi: mksunxiboot: increase block size, so checksum is correct on
>      nand
>    sunxi: nand: add nand spl boot option
>    sunxi: nand: add a20_nandread command
>
>   arch/arm/cpu/armv7/sunxi/board.c |   4 +
>   board/sunxi/Makefile             |   1 +
>   board/sunxi/nand.c               | 252 +++++++++++++++++++++++++++++++++++++++
>   common/Makefile                  |   1 +
>   common/cmd_a20_nandread.c        |  26 ++++
>   common/spl/spl_nand.c            |  23 +++-
>   include/configs/sunxi-common.h   |  25 ++--
>   tools/mksunxiboot.c              |   2 +-
>   8 files changed, 322 insertions(+), 12 deletions(-)
>   create mode 100644 board/sunxi/nand.c
>   create mode 100644 common/cmd_a20_nandread.c
>


More information about the U-Boot mailing list