[U-Boot] [PATCH 17/21] dm: usb: Remove use of fdtdec GPIO support
Simon Glass
sjg at chromium.org
Tue Jan 6 04:05:39 CET 2015
These functions are going away, so use the new uclass support instead.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/usb/host/ehci-exynos.c | 10 +++++-----
drivers/usb/host/ehci-tegra.c | 38 ++++++++++++++++++--------------------
drivers/usb/host/xhci-exynos5.c | 10 +++++-----
3 files changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 6fdbf57..f3c077d 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
struct exynos_ehci {
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
- struct fdt_gpio_state vbus_gpio;
+ struct gpio_desc vbus_gpio;
};
static struct exynos_ehci exynos;
@@ -61,7 +61,8 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
exynos->hcd = (struct ehci_hccr *)addr;
/* Vbus gpio */
- fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+ gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
+ &exynos->vbus_gpio, GPIOD_IS_OUT);
depth = 0;
node = fdtdec_next_compatible_subnode(blob, node,
@@ -236,9 +237,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
#ifdef CONFIG_OF_CONTROL
/* setup the Vbus gpio here */
- if (fdt_gpio_isvalid(&ctx->vbus_gpio) &&
- !fdtdec_setup_gpio(&ctx->vbus_gpio))
- gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+ if (dm_gpio_is_valid(&ctx->vbus_gpio))
+ dm_gpio_set_value(&ctx->vbus_gpio, 1);
#endif
setup_usb_phy(ctx->usb);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 5f0a98e..b5ad1e3 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -72,8 +72,8 @@ struct fdt_usb {
enum usb_init_type init_type;
enum dr_mode dr_mode; /* dual role mode */
enum periph_id periph_id;/* peripheral id */
- struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
- struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */
+ struct gpio_desc vbus_gpio; /* GPIO for vbus enable */
+ struct gpio_desc phy_reset_gpio; /* GPIO to reset ULPI phy */
};
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
@@ -252,17 +252,14 @@ static void set_up_vbus(struct fdt_usb *config, enum usb_init_type init)
return;
}
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ if (dm_gpio_is_valid(&config->vbus_gpio)) {
int vbus_value;
- fdtdec_setup_gpio(&config->vbus_gpio);
+ vbus_value = (init == USB_INIT_HOST);
+ dm_gpio_set_value(&config->vbus_gpio, vbus_value);
- vbus_value = (init == USB_INIT_HOST) ^
- !!(config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW);
- gpio_direction_output(config->vbus_gpio.gpio, vbus_value);
-
- debug("set_up_vbus: GPIO %d %d\n", config->vbus_gpio.gpio,
- vbus_value);
+ debug("set_up_vbus: GPIO %d %d\n",
+ gpio_get_number(&config->vbus_gpio), vbus_value);
}
}
@@ -360,7 +357,7 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
* mux must be switched to actually use a_sess_vld threshold.
*/
if (config->dr_mode == DR_MODE_OTG &&
- fdt_gpio_isvalid(&config->vbus_gpio))
+ dm_gpio_is_valid(&config->vbus_gpio))
clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
VBUS_SENSE_CTL_MASK,
VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
@@ -569,11 +566,10 @@ static int init_ulpi_usb_controller(struct fdt_usb *config,
clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK);
/* reset ULPI phy */
- if (fdt_gpio_isvalid(&config->phy_reset_gpio)) {
- fdtdec_setup_gpio(&config->phy_reset_gpio);
- gpio_direction_output(config->phy_reset_gpio.gpio, 0);
+ if (dm_gpio_is_valid(&config->phy_reset_gpio)) {
+ dm_gpio_set_value(&config->phy_reset_gpio, 0);
mdelay(5);
- gpio_set_value(config->phy_reset_gpio.gpio, 1);
+ dm_gpio_set_value(&config->phy_reset_gpio, 1);
}
/* Reset the usb controller */
@@ -685,14 +681,16 @@ static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
debug("%s: Missing/invalid peripheral ID\n", __func__);
return -FDT_ERR_NOTFOUND;
}
- fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
- fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio",
- &config->phy_reset_gpio);
+ gpio_request_by_name_nodev(blob, node, "nvidia,vbus-gpio", 0,
+ &config->vbus_gpio, GPIOD_IS_OUT);
+ gpio_request_by_name_nodev(blob, node, "nvidia,phy-reset-gpio", 0,
+ &config->phy_reset_gpio, GPIOD_IS_OUT);
debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
"vbus=%d, phy_reset=%d, dr_mode=%d\n",
config->enabled, config->has_legacy_mode, config->utmi,
- config->ulpi, config->periph_id, config->vbus_gpio.gpio,
- config->phy_reset_gpio.gpio, config->dr_mode);
+ config->ulpi, config->periph_id,
+ gpio_get_number(&config->vbus_gpio),
+ gpio_get_number(&config->phy_reset_gpio), config->dr_mode);
return 0;
}
diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
index b4946a3..a77c8bc 100644
--- a/drivers/usb/host/xhci-exynos5.c
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -40,7 +40,7 @@ struct exynos_xhci {
struct exynos_usb3_phy *usb3_phy;
struct xhci_hccr *hcd;
struct dwc3 *dwc3_reg;
- struct fdt_gpio_state vbus_gpio;
+ struct gpio_desc vbus_gpio;
};
static struct exynos_xhci exynos;
@@ -69,7 +69,8 @@ static int exynos_usb3_parse_dt(const void *blob, struct exynos_xhci *exynos)
exynos->hcd = (struct xhci_hccr *)addr;
/* Vbus gpio */
- fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
+ gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
+ &exynos->vbus_gpio, GPIOD_IS_OUT);
depth = 0;
node = fdtdec_next_compatible_subnode(blob, node,
@@ -298,9 +299,8 @@ int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
#ifdef CONFIG_OF_CONTROL
/* setup the Vbus gpio here */
- if (fdt_gpio_isvalid(&ctx->vbus_gpio) &&
- !fdtdec_setup_gpio(&ctx->vbus_gpio))
- gpio_direction_output(ctx->vbus_gpio.gpio, 1);
+ if (dm_gpio_is_valid(&ctx->vbus_gpio))
+ dm_gpio_set_value(&ctx->vbus_gpio, 1);
#endif
ret = exynos_xhci_core_init(ctx);
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list