[U-Boot] [PATCH 20/21] dm: exynos: dts: Use GPIO bank phandles for GPIOs
Simon Glass
sjg at chromium.org
Tue Jan 6 04:05:42 CET 2015
U-Boot now supports using GPIOs using bank phandles instead of global
numbers. Update the exynos device tree files to use this.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/dts/exynos4.dtsi | 7 -------
arch/arm/dts/exynos4210-origen.dts | 2 +-
arch/arm/dts/exynos4210-trats.dts | 4 ++--
arch/arm/dts/exynos4210-universal_c210.dts | 12 ++++++------
arch/arm/dts/exynos4412-odroid.dts | 2 +-
arch/arm/dts/exynos4412-trats2.dts | 6 +++---
arch/arm/dts/exynos5.dtsi | 4 +---
arch/arm/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/dts/exynos5250-snow.dts | 10 +++++-----
arch/arm/dts/exynos5420-peach-pit.dts | 8 ++++----
arch/arm/dts/exynos5422-odroidxu3.dts | 2 +-
arch/arm/dts/exynos5800-peach-pi.dts | 10 +++++-----
12 files changed, 30 insertions(+), 39 deletions(-)
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 77fad48..3c983ed 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -143,11 +143,4 @@
interrupts = <0 131 0>;
};
- gpio: gpio {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
};
diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts
index dd2476c..3f87761 100644
--- a/arch/arm/dts/exynos4210-origen.dts
+++ b/arch/arm/dts/exynos4210-origen.dts
@@ -36,7 +36,7 @@
sdhci at 12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0xA2 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci at 12540000 {
diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts
index 8c7a2c3..36d02df 100644
--- a/arch/arm/dts/exynos4210-trats.dts
+++ b/arch/arm/dts/exynos4210-trats.dts
@@ -101,7 +101,7 @@
sdhci at 12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 146 0>;
+ pwr-gpios = <&gpk0 2 0>;
};
sdhci at 12520000 {
@@ -111,7 +111,7 @@
sdhci at 12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 284 0>;
+ cd-gpios = <&gpx3 4 0>;
};
sdhci at 12540000 {
diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts
index 808c3f7..16948c9 100644
--- a/arch/arm/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/dts/exynos4210-universal_c210.dts
@@ -24,7 +24,7 @@
sdhci at 12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 146 0>;
+ pwr-gpios = <&gpk0 2 0>;
};
sdhci at 12520000 {
@@ -34,7 +34,7 @@
sdhci at 12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 284 0>;
+ cd-gpios = <&gpx3 4 0>;
};
sdhci at 12540000 {
@@ -43,10 +43,10 @@
soft-spi {
compatible = "u-boot,soft-spi";
- cs-gpio = <&gpio 235 0>; /* Y43 */
- sclk-gpio = <&gpio 225 0>; /* Y31 */
- mosi-gpio = <&gpio 227 0>; /* Y33 */
- miso-gpio = <&gpio 224 0>; /* Y30 */
+ cs-gpio = <&gpy4 3 0>;
+ sclk-gpio = <&gpy3 1 0>;
+ mosi-gpio = <&gpy3 3 0>;
+ miso-gpio = <&gpy3 0 0>;
spi-delay-us = <1>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index c78efec..29ad6ab 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -51,7 +51,7 @@
sdhci at 12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 122 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci at 12540000 {
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 60e4515..dd238df 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -416,7 +416,7 @@
sdhci at 12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 0x6a 0>;
+ pwr-gpios = <&gpk0 4 0>;
status = "disabled";
};
@@ -427,7 +427,7 @@
sdhci at 12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x7a 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci at 12540000 {
@@ -437,7 +437,7 @@
dwmmc at 12550000 {
samsung,bus-width = <8>;
samsung,timing = <2 1 0>;
- pwr-gpios = <&gpio 0x6a 0>;
+ pwr-gpios = <&gpk0 4 0>;
fifoth_val = <0x203f0040>;
bus_hz = <400000000>;
div = <0x3>;
diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
index e539068..238acb8 100644
--- a/arch/arm/dts/exynos5.dtsi
+++ b/arch/arm/dts/exynos5.dtsi
@@ -6,6 +6,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "samsung,exynos5";
@@ -247,7 +248,4 @@
u-boot,dm-pre-reloc;
id = <3>;
};
-
- gpio: gpio {
- };
};
diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
index 8850409..9273562 100644
--- a/arch/arm/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/dts/exynos5250-smdk5250.dts
@@ -146,6 +146,6 @@
};
ehci at 12110000 {
- samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 95af025..b1a05a1 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -44,7 +44,7 @@
reg = <0x1e>;
compatible = "google,cros-ec";
i2c-max-frequency = <100000>;
- ec-interrupt = <&gpio 182 1>;
+ ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
};
power-regulator at 48 {
@@ -68,7 +68,7 @@
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
- ec-interrupt = <&gpio 182 1>;
+ ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
optimise-flash-write;
status = "disabled";
};
@@ -76,7 +76,7 @@
sound at 3830000 {
samsung,codec-type = "max98095";
- codec-enable-gpio = <&gpio 0xb7 0>;
+ codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
};
sound at 12d60000 {
@@ -131,11 +131,11 @@
};
ehci at 12110000 {
- samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
};
xhci at 12000000 {
- samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
+ samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
};
tmu at 10060000 {
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
index fde863d..8bb651c 100644
--- a/arch/arm/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -17,7 +17,7 @@
"google,peach", "samsung,exynos5420", "samsung,exynos5";
config {
- google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+ google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
@@ -163,7 +163,7 @@
spi-half-duplex;
spi-max-timeout-ms = <1100>;
spi-frame-header = <0xec>;
- ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+ ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
/*
* This describes the flash memory within the EC. Note
@@ -179,11 +179,11 @@
};
xhci at 12000000 {
- samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+ samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci at 12400000 {
- samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+ samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd at 14400000 {
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
index 79a7acd..8f46637 100644
--- a/arch/arm/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -32,7 +32,7 @@
};
ehci at 12110000 {
- samsung,vbus-gpio = <&gpio 0x66 0>; /* X26 */
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
serial at 12C20000 {
diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
index 2f9d2db..81db8b6 100644
--- a/arch/arm/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/dts/exynos5800-peach-pi.dts
@@ -17,7 +17,7 @@
"google,peach", "samsung,exynos5800", "samsung,exynos5";
config {
- google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+ google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
@@ -32,7 +32,7 @@
mem-manuf = "samsung";
mem-type = "ddr3";
clock-frequency = <800000000>;
- arm-frequency = <1700000000>;
+ arm-frequency = <900000000>;
};
tmu at 10060000 {
@@ -102,7 +102,7 @@
spi-half-duplex;
spi-max-timeout-ms = <1100>;
spi-frame-header = <0xec>;
- ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+ ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
/*
* This describes the flash memory within the EC. Note
@@ -118,11 +118,11 @@
};
xhci at 12000000 {
- samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+ samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci at 12400000 {
- samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+ samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd at 14400000 {
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list