[U-Boot] [PATCH 0/3] pmic:pfuze support buck regulator mode switch

[Peng Fan]

This patch set is to support buck regulator can working in different
switching modes.

To improve system efficiency the buck regulators can operate
in different switching modes.

patch 1/3 is to add related bit definitions and registers.
patch 2/3 is to implement the switching mode init function.
patch 3/3 is to add related mode init function in board code.

mx6slevk board is not included in this patch set, since power and i2c
interface are not implemented for it. Future patch will cover this to add
PAD setting, power_init_board and etc.

Peng Fan (3):
  pmic:pfuz100 add switch mode and more registers
  pmic:pfuze implement pmic_mode_init
  imx:mx6 set normal APS and standby PFM mode

 board/freescale/common/pfuze.c                | 36 ++++++++++++++++++
 board/freescale/common/pfuze.h                |  1 +
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  5 +++
 board/freescale/mx6sabresd/mx6sabresd.c       |  6 ++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   |  6 ++-
 include/power/pfuze100_pmic.h                 | 53 +++++++++++++++++++++++++++
 6 files changed, 105 insertions(+), 2 deletions(-)

-- 
1.8.4