[U-Boot] [PATCH 09/10] board/synopsys: remove selection of CPU from the board

[Alexey Brodkin]

Both ARCangel4 and AXS10x are FPGA-based boards so they may have
different CPUs. For now we have only 1 option (ARC700) and we define
this as default in arch Kconfig.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
 arch/arc/Kconfig              | 3 +++
 board/synopsys/Kconfig        | 6 ------
 board/synopsys/axs101/Kconfig | 3 ---
 3 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index d3ef58b..6a77b8f 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -4,6 +4,9 @@ menu "ARC architecture"
 config SYS_ARCH
 	default "arc"
 
+config SYS_CPU
+	default "arc700"
+
 choice
 	prompt "Target select"
 
diff --git a/board/synopsys/Kconfig b/board/synopsys/Kconfig
index a54d3df..f614f88 100644
--- a/board/synopsys/Kconfig
+++ b/board/synopsys/Kconfig
@@ -1,8 +1,5 @@
 if TARGET_ARCANGEL4
 
-config SYS_CPU
-	default "arc700"
-
 config SYS_VENDOR
 	default "synopsys"
 
@@ -13,9 +10,6 @@ endif
 
 if TARGET_ARCANGEL4_BE
 
-config SYS_CPU
-	default "arc700"
-
 config SYS_VENDOR
 	default "synopsys"
 
diff --git a/board/synopsys/axs101/Kconfig b/board/synopsys/axs101/Kconfig
index 8448265..79e5400 100644
--- a/board/synopsys/axs101/Kconfig
+++ b/board/synopsys/axs101/Kconfig
@@ -1,8 +1,5 @@
 if TARGET_AXS101
 
-config SYS_CPU
-	default "arc700"
-
 config SYS_BOARD
 	default "axs101"
 
-- 
2.1.0