[U-Boot] [PATCH v3 04/11] net/fm: Enable FMAN ports if l2switch ports are connected over SGMII

[Codrin Ciubotariu]

If SerDes is configured to connect L2 Switch ports from T1040
over SGMII or QSGMII, the two FMAN fixed ports (FM1 at DTSEC1 and FM2 at DTSEC2)
that are connected to two L2 swtch ports must be enabled. These
ports don't have PHYs and must be treated accordingly.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---

Changes for v2: None

Changes for v3: Removed "Change-id" line from comment;

 drivers/net/fm/t1040.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index d2a097e..0458366 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -50,7 +50,8 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	switch (port) {
 	case FM1_DTSEC1:
 	case FM1_DTSEC2:
-		if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1))
+		if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1) ||
+		    is_serdes_configured(SGMII_SW1_MAC1  + port - FM1_DTSEC1))
 			return PHY_INTERFACE_MODE_QSGMII;
 	case FM1_DTSEC3:
 	case FM1_DTSEC4:
-- 
1.7.11.7