[U-Boot] [PATCH] net/designware: add error message on DMA reset timeout

[Alexey Brodkin]

If for some reason DMA module fails to reset user oserves only this:
--->---
# dhcp
Trying dwmac.e0018000
FAIL
--->---

This message makes not much sense.
With proposed change error message will be more helpful:
--->---
# dhcp
Trying dwmac.e0018000
DMA reset timeout
FAIL
--->---

For example user may do power toggle to recover board functionality.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Chin Liang See <clsee at altera.com>
Cc: Dinh Nguyen <dinguyen at altera.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Tom Rini <trini at ti.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Pavel Machek <pavel at denx.de>
Cc: Joe Hershberger <joe.hershberger at gmail.com>
Cc: Ian Campbell <ijc at hellion.org.uk>
Cc: Marek Vasut <marex at denx.de>
---
 drivers/net/designware.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 9ded895..c03e935 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -236,8 +236,10 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis)
 
 	start = get_timer(0);
 	while (readl(&dma_p->busmode) & DMAMAC_SRST) {
-		if (get_timer(start) >= CONFIG_MACRESET_TIMEOUT)
+		if (get_timer(start) >= CONFIG_MACRESET_TIMEOUT) {
+			printf("DMA reset timeout\n");
 			return -1;
+		}
 
 		mdelay(100);
 	};
-- 
2.1.0