[U-Boot] [PATCH 08/12] ARM: zynq: Use CMD_FS_GENERIC

[Michal Simek]

Based on:
"am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to env"
(sha1: 73a27a84e58cb99b4e64ed6a35eab5bc61f44f29)

Fix filesystem specific commands for loading.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 include/configs/zynq-common.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 3a62ec75dbc9..f968e7666dc1 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -100,6 +100,7 @@
 # define CONFIG_DOS_PARTITION
 # define CONFIG_CMD_EXT4
 # define CONFIG_CMD_EXT4_WRITE
+# define CONFIG_CMD_FS_GENERIC
 #endif

 #define CONFIG_SYS_I2C_ZYNQ
@@ -159,14 +160,14 @@
 		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 		"bootm ${load_addr}\0" \
 	"sdboot=echo Copying FIT from SD to RAM... && " \
-		"fatload mmc 0 ${load_addr} ${fit_image} && " \
+		"load mmc 0 ${load_addr} ${fit_image} && " \
 		"bootm ${load_addr}\0" \
 	"jtagboot=echo TFTPing FIT to RAM... && " \
 		"tftpboot ${load_addr} ${fit_image} && " \
 		"bootm ${load_addr}\0" \
 	"usbboot=if usb start; then " \
 			"echo Copying FIT from USB to RAM... && " \
-			"fatload usb 0 ${load_addr} ${fit_image} && " \
+			"load usb 0 ${load_addr} ${fit_image} && " \
 			"bootm ${load_addr}\0" \
 		"fi\0"

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150114/61daca9a/attachment.pgp>