[U-Boot] [PATCH 4/4] Exynos5: Remove dead code for fetching clocks
Akshay Saraswat
akshay.s at samsung.com
Wed Jan 14 14:35:36 CET 2015
Removing dead code of peripheral and SoC specific function
implementations which was used for fetching peripheral clocks.
This code is not being used anymore because of the introduction
of generic clock_get_periph_rate function.
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
arch/arm/cpu/armv7/exynos/clock.c | 226 --------------------------------------
1 file changed, 226 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 9c719aa..41af3a6 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -687,27 +687,6 @@ static unsigned long exynos4x12_get_pwm_clk(void)
return pclk;
}
-/* exynos5420: return pwm clock frequency */
-static unsigned long exynos5420_get_pwm_clk(void)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long pclk, sclk;
- unsigned int ratio;
-
- /*
- * CLK_DIV_PERIC0
- * PWM_RATIO [31:28]
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> 28) & 0xf;
- sclk = get_pll_clk(MPLL);
-
- pclk = sclk / (ratio + 1);
-
- return pclk;
-}
-
/* exynos4: return uart clock frequency */
static unsigned long exynos4_get_uart_clk(int dev_index)
{
@@ -800,100 +779,6 @@ static unsigned long exynos4x12_get_uart_clk(int dev_index)
return uclk;
}
-/* exynos5: return uart clock frequency */
-static unsigned long exynos5_get_uart_clk(int dev_index)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel;
- unsigned int ratio;
-
- /*
- * CLK_SRC_PERIC0
- * UART0_SEL [3:0]
- * UART1_SEL [7:4]
- * UART2_SEL [8:11]
- * UART3_SEL [12:15]
- * UART4_SEL [16:19]
- * UART5_SEL [23:20]
- */
- sel = readl(&clk->src_peric0);
- sel = (sel >> (dev_index << 2)) & 0xf;
-
- if (sel == 0x6)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x8)
- sclk = get_pll_clk(VPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_PERIC0
- * UART0_RATIO [3:0]
- * UART1_RATIO [7:4]
- * UART2_RATIO [8:11]
- * UART3_RATIO [12:15]
- * UART4_RATIO [16:19]
- * UART5_RATIO [23:20]
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> (dev_index << 2)) & 0xf;
-
- uclk = sclk / (ratio + 1);
-
- return uclk;
-}
-
-/* exynos5420: return uart clock frequency */
-static unsigned long exynos5420_get_uart_clk(int dev_index)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel;
- unsigned int ratio;
-
- /*
- * CLK_SRC_PERIC0
- * UART0_SEL [6:4]
- * UART1_SEL [10:8]
- * UART2_SEL [14:12]
- * UART3_SEL [18:16]
- * generalised calculation as follows
- * sel = (sel >> ((dev_index * 4) + 4)) & mask;
- */
- sel = readl(&clk->src_peric0);
- sel = (sel >> ((dev_index * 4) + 4)) & 0x7;
-
- if (sel == 0x3)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x6)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(RPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_PERIC0
- * UART0_RATIO [11:8]
- * UART1_RATIO [15:12]
- * UART2_RATIO [19:16]
- * UART3_RATIO [23:20]
- * generalised calculation as follows
- * ratio = (ratio >> ((dev_index * 4) + 8)) & mask;
- */
- ratio = readl(&clk->div_peric0);
- ratio = (ratio >> ((dev_index * 4) + 8)) & 0xf;
-
- uclk = sclk / (ratio + 1);
-
- return uclk;
-}
-
static unsigned long exynos4_get_mmc_clk(int dev_index)
{
struct exynos4_clock *clk =
@@ -943,94 +828,6 @@ static unsigned long exynos4_get_mmc_clk(int dev_index)
return uclk;
}
-static unsigned long exynos5_get_mmc_clk(int dev_index)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel, ratio, pre_ratio;
- int shift = 0;
-
- sel = readl(&clk->src_fsys);
- sel = (sel >> (dev_index << 2)) & 0xf;
-
- if (sel == 0x6)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x7)
- sclk = get_pll_clk(EPLL);
- else if (sel == 0x8)
- sclk = get_pll_clk(VPLL);
- else
- return 0;
-
- switch (dev_index) {
- case 0:
- case 1:
- ratio = readl(&clk->div_fsys1);
- pre_ratio = readl(&clk->div_fsys1);
- break;
- case 2:
- case 3:
- ratio = readl(&clk->div_fsys2);
- pre_ratio = readl(&clk->div_fsys2);
- break;
- default:
- return 0;
- }
-
- if (dev_index == 1 || dev_index == 3)
- shift = 16;
-
- ratio = (ratio >> shift) & 0xf;
- pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
- uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
-
- return uclk;
-}
-
-static unsigned long exynos5420_get_mmc_clk(int dev_index)
-{
- struct exynos5420_clock *clk =
- (struct exynos5420_clock *)samsung_get_base_clock();
- unsigned long uclk, sclk;
- unsigned int sel, ratio;
-
- /*
- * CLK_SRC_FSYS
- * MMC0_SEL [10:8]
- * MMC1_SEL [14:12]
- * MMC2_SEL [18:16]
- * generalised calculation as follows
- * sel = (sel >> ((dev_index * 4) + 8)) & mask
- */
- sel = readl(&clk->src_fsys);
- sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
-
- if (sel == 0x3)
- sclk = get_pll_clk(MPLL);
- else if (sel == 0x4)
- sclk = get_pll_clk(SPLL);
- else if (sel == 0x6)
- sclk = get_pll_clk(EPLL);
- else
- return 0;
-
- /*
- * CLK_DIV_FSYS1
- * MMC0_RATIO [9:0]
- * MMC1_RATIO [19:10]
- * MMC2_RATIO [29:20]
- * generalised calculation as follows
- * ratio = (ratio >> (dev_index * 10)) & mask
- */
- ratio = readl(&clk->div_fsys1);
- ratio = (ratio >> (dev_index * 10)) & 0x3ff;
-
- uclk = (sclk / (ratio + 1));
-
- return uclk;
-}
-
/* exynos4: set the mmc clock */
static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
@@ -1409,29 +1206,6 @@ void exynos4_set_mipi_clk(void)
clrsetbits_le32(&clk->div_lcd0, 0xf << 16, 0x1 << 16);
}
-/*
- * I2C
- *
- * exynos5: obtaining the I2C clock
- */
-static unsigned long exynos5_get_i2c_clk(void)
-{
- struct exynos5_clock *clk =
- (struct exynos5_clock *)samsung_get_base_clock();
- unsigned long aclk_66, aclk_66_pre, sclk;
- unsigned int ratio;
-
- sclk = get_pll_clk(MPLL);
-
- ratio = (readl(&clk->div_top1)) >> 24;
- ratio &= 0x7;
- aclk_66_pre = sclk / (ratio + 1);
- ratio = readl(&clk->div_top0);
- ratio &= 0x7;
- aclk_66 = aclk_66_pre / (ratio + 1);
- return aclk_66;
-}
-
int exynos5_set_epll_clk(unsigned long rate)
{
unsigned int epll_con, epll_con_k;
--
1.9.1
More information about the U-Boot
mailing list