[U-Boot] [PATCHv1 11/22] arm: socfpga: spl: printout sdram size

[Marek Vasut]

On Wednesday, January 14, 2015 at 05:40:51 PM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen at opensource.altera.com>
> 
> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> ---
>  arch/arm/cpu/armv7/socfpga/spl.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/socfpga/spl.c
> b/arch/arm/cpu/armv7/socfpga/spl.c index 9481fd5..16ca8b0 100644
> --- a/arch/arm/cpu/armv7/socfpga/spl.c
> +++ b/arch/arm/cpu/armv7/socfpga/spl.c
> @@ -55,6 +55,7 @@ u32 spl_boot_device(void)
>   */
>  void spl_board_init(void)
>  {
> +	unsigned long sdram_size;
>  #ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
>  	cm_config_t cm_default_cfg = {
>  		/* main group */
> @@ -185,4 +186,7 @@ void spl_board_init(void)
>  	/* SDRAM calibration */
>  	if (sdram_calibration_full() == 0)
>  		hang();
> +
> +	sdram_size = sdram_calculate_size();
> +	printf("SDRAM: %ld MiB\n", (sdram_size >> 20));

Hi!

This will be printed by the "big" U-Boot as well, so you might want to turn this 
into a debug() ?

>  }

Best regards,
Marek Vasut