[U-Boot] [PATCH 1/4] dumpimage: add 'T' option to explicitly set the image type
Guilherme Maciel Ferreira
guilherme.maciel.ferreira at gmail.com
Thu Jan 15 05:54:40 CET 2015
From: Guilherme Maciel Ferreira <guilherme.maciel at datacom.ind.br>
Some image types, like "KeyStone GP", do not have magic numbers to
distinguish them from other image types. Thus, the automatic image
type discovery does not work correctly.
This patch also fix some integer type mismatches.
Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira at gmail.com>
---
README | 7 ++--
test/image/test-imagetools.sh | 48 +++++++++++++++-------------
tools/dumpimage.c | 70 ++++++++++++++++++++--------------------
tools/gpimage-common.c | 3 +-
tools/mkimage.c | 3 --
5 files changed, 67 insertions(+), 64 deletions(-)
diff --git a/README b/README
index 0fec497..398b3cc 100644
--- a/README
+++ b/README
@@ -5900,9 +5900,10 @@ option performs the converse operation of the mkimage's second form (the "-d"
option). Given an image built by mkimage, the dumpimage extracts a "data file"
from the image:
- tools/dumpimage -i image -p position data_file
- -i ==> extract from the 'image' a specific 'data_file', \
- indexed by 'position'
+ tools/dumpimage -i image -T type -p position data_file
+ -i ==> extract from the 'image' a specific 'data_file'
+ -T ==> set image type to 'type'
+ -p ==> 'position' (starting at 0) of the 'data_file' inside the 'image'
Installing a Linux Image:
diff --git a/test/image/test-imagetools.sh b/test/image/test-imagetools.sh
index 9e299e1..8aaaade 100755
--- a/test/image/test-imagetools.sh
+++ b/test/image/test-imagetools.sh
@@ -13,9 +13,9 @@
# ./test/image/test-imagetools.sh
BASEDIR=sandbox
-SRCDIR=sandbox/boot
+SRCDIR=${BASEDIR}/boot
IMAGE_NAME="v1.0-test"
-IMAGE=linux.img
+IMAGE_MULTI=linux.img
DATAFILE0=vmlinuz
DATAFILE1=initrd.img
DATAFILE2=System.map
@@ -34,14 +34,14 @@ cleanup()
for file in ${DATAFILES}; do
rm -f ${file} ${SRCDIR}/${file}
done
- rm -f ${IMAGE} ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} ${TEST_OUT}
+ rm -f ${IMAGE_MULTI} ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} ${TEST_OUT}
rmdir ${SRCDIR}
}
# Check that two files are the same
assert_equal()
{
- if ! diff $1 $2; then
+ if ! diff -u $1 $2; then
echo "Failed."
cleanup
exit 1
@@ -82,35 +82,39 @@ do_cmd_redir()
${cmd} >${redir}
}
-# Write files into an image
-create_image()
+# Write files into an multi-file image
+create_multi_image()
{
local files="${SRCDIR}/${DATAFILE0}:${SRCDIR}/${DATAFILE1}"
files+=":${SRCDIR}/${DATAFILE2}"
- echo -e "\nBuilding image..."
+ echo -e "\nBuilding multi-file image..."
do_cmd ${MKIMAGE} -A x86 -O linux -T multi -n \"${IMAGE_NAME}\" \
- -d ${files} ${IMAGE}
+ -d ${files} ${IMAGE_MULTI}
echo "done."
}
-# Extract files from an image
-extract_image()
+# Extract files from an multi-file image
+extract_multi_image()
{
- echo -e "\nExtracting image contents..."
- do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 0 ${DATAFILE0}
- do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 1 ${DATAFILE1}
- do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2}
- do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2} -o ${TEST_OUT}
+ echo -e "\nExtracting multi-file image contents..."
+ do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 0 ${DATAFILE0}
+ do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 1 ${DATAFILE1}
+ do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 2 ${DATAFILE2}
+ do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 2 ${DATAFILE2} -o ${TEST_OUT}
echo "done."
}
# List the contents of a file
+# Args:
+# image filename
list_image()
{
+ local image="$1"
+
echo -e "\nListing image contents..."
- do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${IMAGE}
- do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${IMAGE}
+ do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${image}
+ do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${image}
echo "done."
}
@@ -120,16 +124,16 @@ main()
create_files
- # Compress and extract multifile images, compare the result
- create_image
- extract_image
+ # Compress and extract multi-file images, compare the result
+ create_multi_image
+ extract_multi_image
for file in ${DATAFILES}; do
assert_equal ${file} ${SRCDIR}/${file}
done
assert_equal ${TEST_OUT} ${DATAFILE2}
- # List contents and compares output fro tools
- list_image
+ # List contents of multi-file image and compares output from tools
+ list_image ${IMAGE_MULTI}
assert_equal ${DUMPIMAGE_LIST} ${MKIMAGE_LIST}
# Remove files created
diff --git a/tools/dumpimage.c b/tools/dumpimage.c
index 80bf583..8f1527a 100644
--- a/tools/dumpimage.c
+++ b/tools/dumpimage.c
@@ -12,9 +12,6 @@
static void usage(void);
-/* image_type_params linked list to maintain registered image types supports */
-static struct image_type_params *dumpimage_tparams;
-
/* parameters initialized by core will be used by the image type code */
static struct image_tool_params params = {
.type = IH_TYPE_KERNEL,
@@ -31,33 +28,27 @@ static struct image_tool_params params = {
* returns negative if input image format does not match with any of
* supported image types
*/
-static int dumpimage_extract_datafile(void *ptr, struct stat *sbuf)
+static int dumpimage_extract_datafile(struct image_type_params *tparams,
+ void *ptr, struct stat *sbuf)
{
int retval = -1;
- struct image_type_params *curr;
- struct image_type_params *start = ll_entry_start(
- struct image_type_params, image_type);
- struct image_type_params *end = ll_entry_end(
- struct image_type_params, image_type);
-
- for (curr = start; curr != end; curr++) {
- if (curr->verify_header) {
- retval = curr->verify_header((unsigned char *)ptr,
- sbuf->st_size, ¶ms);
- if (retval != 0)
- continue;
- /*
- * Extract the file from the image
- * if verify is successful
- */
- if (curr->extract_datafile) {
- curr->extract_datafile(ptr, ¶ms);
- } else {
- fprintf(stderr,
- "%s: extract_datafile undefined for %s\n",
- params.cmdname, curr->name);
- break;
- }
+
+ if (tparams->verify_header) {
+ retval = tparams->verify_header((unsigned char *)ptr,
+ sbuf->st_size, ¶ms);
+ if (retval != 0)
+ return -1;
+ /*
+ * Extract the file from the image
+ * if verify is successful
+ */
+ if (tparams->extract_datafile) {
+ retval = tparams->extract_datafile(ptr, ¶ms);
+ } else {
+ fprintf(stderr,
+ "%s: extract_datafile undefined for %s\n",
+ params.cmdname, tparams->name);
+ return -2;
}
}
@@ -75,7 +66,7 @@ int main(int argc, char **argv)
params.cmdname = *argv;
- while ((opt = getopt(argc, argv, "li:o:p:V")) != -1) {
+ while ((opt = getopt(argc, argv, "li:o:T:p:V")) != -1) {
switch (opt) {
case 'l':
params.lflag = 1;
@@ -87,6 +78,12 @@ int main(int argc, char **argv)
case 'o':
params.outfile = optarg;
break;
+ case 'T':
+ params.type = genimg_get_type_id(optarg);
+ if (params.type < 0) {
+ usage();
+ }
+ break;
case 'p':
params.pflag = strtoul(optarg, &ptr, 10);
if (*ptr) {
@@ -101,6 +98,7 @@ int main(int argc, char **argv)
exit(EXIT_SUCCESS);
default:
usage();
+ break;
}
}
@@ -110,7 +108,7 @@ int main(int argc, char **argv)
/* set tparams as per input type_id */
tparams = imagetool_get_type(params.type);
if (tparams == NULL) {
- fprintf(stderr, "%s: unsupported type %s\n",
+ fprintf(stderr, "%s: unsupported type: %s\n",
params.cmdname, genimg_get_type_name(params.type));
exit(EXIT_FAILURE);
}
@@ -147,7 +145,7 @@ int main(int argc, char **argv)
exit(EXIT_FAILURE);
}
- if ((unsigned)sbuf.st_size < tparams->header_size) {
+ if ((uint32_t)sbuf.st_size < tparams->header_size) {
fprintf(stderr,
"%s: Bad size: \"%s\" is not valid image\n",
params.cmdname, params.imagefile);
@@ -172,7 +170,8 @@ int main(int argc, char **argv)
* Extract the data files from within the matched
* image type. Returns the error code if not matched
*/
- retval = dumpimage_extract_datafile(ptr, &sbuf);
+ retval = dumpimage_extract_datafile(tparams, ptr,
+ &sbuf);
} else {
/*
* Print the image information for matched image type
@@ -199,9 +198,10 @@ static void usage(void)
" -l ==> list image header information\n",
params.cmdname);
fprintf(stderr,
- " %s -i image [-p position] [-o outfile] data_file\n"
- " -i ==> extract from the 'image' a specific 'data_file'"
- ", indexed by 'position' (starting at 0)\n",
+ " %s -i image -T type [-p position] [-o outfile] data_file\n"
+ " -i ==> extract from the 'image' a specific 'data_file'\n"
+ " -T ==> set image type to 'type'\n"
+ " -p ==> 'position' (starting at 0) of the 'data_file' inside the 'image'\n",
params.cmdname);
fprintf(stderr,
" %s -V ==> print version information and exit\n",
diff --git a/tools/gpimage-common.c b/tools/gpimage-common.c
index b343a3a..5ad52be 100644
--- a/tools/gpimage-common.c
+++ b/tools/gpimage-common.c
@@ -32,7 +32,8 @@ void to_be32(uint32_t *gph_size, uint32_t *gph_load_addr)
int gph_verify_header(struct gp_header *gph, int be)
{
- uint32_t gph_size = gph->size, gph_load_addr = gph->load_addr;
+ uint32_t gph_size = gph->size;
+ uint32_t gph_load_addr = gph->load_addr;
if (be)
to_be32(&gph_size, &gph_load_addr);
diff --git a/tools/mkimage.c b/tools/mkimage.c
index f668487..5ccd951 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -15,9 +15,6 @@
static void copy_file(int, const char *, int);
static void usage(void);
-/* image_type_params link list to maintain registered image type supports */
-struct image_type_params *mkimage_tparams = NULL;
-
/* parameters initialized by core will be used by the image type code */
struct image_tool_params params = {
.os = IH_OS_LINUX,
--
1.7.0.4
More information about the U-Boot
mailing list