[U-Boot] [PATCH 01/12] sunxi: Drop pll6 setting from clock_init_uart

[Hans de Goede]

As the comment says now that we have SPL support this is no longer necessary,
as PLL6 is already setup with the exact same parameters by the SPL.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index d7a7040..e2a7867 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -45,10 +45,10 @@ void clock_init_safe(void)
 
 void clock_init_uart(void)
 {
+#if CONFIG_CONS_INDEX < 5
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
-#if CONFIG_CONS_INDEX < 5
 	/* uart clock source is apb2 */
 	writel(APB2_CLK_SRC_OSC24M|
 	       APB2_CLK_RATE_N_1|
@@ -68,9 +68,6 @@ void clock_init_uart(void)
 	/* enable R_PIO and R_UART clocks, and de-assert resets */
 	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
 #endif
-
-	/* Dup with clock_init_safe(), drop once sun6i SPL support lands */
-	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
 }
 
 int clock_twi_onoff(int port, int state)
-- 
2.1.0