[U-Boot] [PATCH v2 3/6] Exynos542x: Add and enable get_periph_rate support

Joonyoung Shim jy0922.shim at samsung.com
Fri Jan 16 05:58:33 CET 2015


Hi,

On 01/15/2015 10:31 PM, Akshay Saraswat wrote:
> We planned to fetch peripheral rate through one generic API per
> peripheral. These generic peripheral functions are in turn
> expected to fetch apt values from a function refactored as
> per SoC versions. This patch adds support for fetching peripheral
> rates for Exynos5420 and Exynos5800.
> 
> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> ---
> Changes since v1:
> 	- Changes suuport -> support in commit message.
> 	- Removed position change of exynos5420_get_pll_clk.
> 	- Removed #ifdef.
> 
>  arch/arm/cpu/armv7/exynos/clock.c      | 151 +++++++++++++++++++++++++++++++--
>  arch/arm/include/asm/arch-exynos/clk.h |   5 +-
>  2 files changed, 148 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
> index 6a1b05f..1ef4f49 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -27,7 +27,7 @@ struct clk_bit_info {
>  };
>  
>  /* periph_id src_bit div_bit prediv_bit */
> -static struct clk_bit_info clk_bit_info[] = {
> +static struct clk_bit_info exynos5_bit_info[] = {
>  	{PERIPH_ID_UART0,	0,	0,	-1},
>  	{PERIPH_ID_UART1,	4,	4,	-1},
>  	{PERIPH_ID_UART2,	8,	8,	-1},
> @@ -65,6 +65,44 @@ static struct clk_bit_info clk_bit_info[] = {
>  	{PERIPH_ID_NONE,	-1,	-1,	-1},
>  };
>  
> +static struct clk_bit_info exynos542x_bit_info[] = {
> +	{PERIPH_ID_UART0,	4,	8,	-1},
> +	{PERIPH_ID_UART1,	8,	12,	-1},
> +	{PERIPH_ID_UART2,	12,	16,	-1},
> +	{PERIPH_ID_UART3,	16,	20,	-1},
> +	{PERIPH_ID_I2C0,	-1,	8,	-1},
> +	{PERIPH_ID_I2C1,	-1,	8,	-1},
> +	{PERIPH_ID_I2C2,	-1,	8,	-1},
> +	{PERIPH_ID_I2C3,	-1,	8,	-1},
> +	{PERIPH_ID_I2C4,	-1,	8,	-1},
> +	{PERIPH_ID_I2C5,	-1,	8,	-1},
> +	{PERIPH_ID_I2C6,	-1,	8,	-1},
> +	{PERIPH_ID_I2C7,	-1,	8,	-1},
> +	{PERIPH_ID_SPI0,	20,	20,	8},
> +	{PERIPH_ID_SPI1,	24,	24,	16},
> +	{PERIPH_ID_SPI2,	28,	28,	24},
> +	{PERIPH_ID_SDMMC0,	0,	0,	-1},
> +	{PERIPH_ID_SDMMC1,	4,	10,	-1},
> +	{PERIPH_ID_SDMMC2,	8,	20,	-1},
> +	{PERIPH_ID_SDMMC3,	-1,	-1,	-1},
> +	{PERIPH_ID_I2C8,	-1,	8,	-1},
> +	{PERIPH_ID_I2C9,	-1,	8,	-1},
> +	{PERIPH_ID_I2S0,	0,	0,	4},
> +	{PERIPH_ID_I2S1,	4,	12,	16},
> +	{PERIPH_ID_SROMC,	-1,	-1,	-1},
> +	{PERIPH_ID_SPI3,	12,	16,	0},
> +	{PERIPH_ID_SPI4,	16,	20,	8},
> +	{PERIPH_ID_SDMMC4,	16,	0,	8},
> +	{PERIPH_ID_PWM0,	24,	28,	-1},
> +	{PERIPH_ID_PWM1,	24,	28,	-1},
> +	{PERIPH_ID_PWM2,	24,	28,	-1},
> +	{PERIPH_ID_PWM3,	24,	28,	-1},
> +	{PERIPH_ID_PWM4,	24,	28,	-1},
> +	{PERIPH_ID_I2C10,	-1,	8,	-1},
> +
> +	{PERIPH_ID_NONE,	-1,	-1,	-1},
> +};
> +
>  /* Epll Clock division values to achive different frequency output */
>  static struct set_epll_con_val exynos5_epll_div[] = {
>  	{ 192000000, 0, 48, 3, 1, 0 },
> @@ -310,13 +348,19 @@ static unsigned long exynos542x_get_pll_clk(int pllreg)
>  static struct clk_bit_info *get_clk_bit_info(int peripheral)
>  {
>  	int i;
> +	struct clk_bit_info *info;
>  
> -	for (i = 0; clk_bit_info[i].id != PERIPH_ID_NONE; i++) {
> -		if (clk_bit_info[i].id == peripheral)
> +	if (proid_is_exynos5420() || proid_is_exynos5800())
> +		info = exynos542x_bit_info;
> +	else
> +		info = exynos5_bit_info;
> +
> +	for (i = 0; info[i].id != PERIPH_ID_NONE; i++) {
> +		if (info[i].id == peripheral)
>  			break;
>  	}
>  
> -	return &clk_bit_info[i];
> +	return &info[i];
>  }
>  
>  static unsigned long exynos5_get_periph_rate(int peripheral)
> @@ -415,12 +459,107 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
>  	return sub_clk;
>  }
>  
> +static unsigned long exynos542x_get_periph_rate(int peripheral)
> +{
> +	struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
> +	unsigned long sclk, sub_clk;
> +	unsigned int src, div, sub_div = 0;
> +	struct exynos5420_clock *clk =
> +			(struct exynos5420_clock *)samsung_get_base_clock();
> +
> +	switch (peripheral) {
> +	case PERIPH_ID_UART0:
> +	case PERIPH_ID_UART1:
> +	case PERIPH_ID_UART2:
> +	case PERIPH_ID_UART3:
> +		src = readl(&clk->src_peric0);
> +		div = readl(&clk->div_peric0);
> +		break;
> +	case PERIPH_ID_PWM0:
> +	case PERIPH_ID_PWM1:
> +	case PERIPH_ID_PWM2:
> +	case PERIPH_ID_PWM3:
> +	case PERIPH_ID_PWM4:
> +		src = readl(&clk->src_peric0);
> +		div = readl(&clk->div_peric0);
> +		break;

UARTx and PWMx use same register, so you can remove duplicated codes.

> +	case PERIPH_ID_SPI0:
> +	case PERIPH_ID_SPI1:
> +	case PERIPH_ID_SPI2:
> +		src = readl(&clk->src_peric1);
> +		div = readl(&clk->div_peric1);
> +		sub_div = readl(&clk->div_peric4);
> +		break;
> +	case PERIPH_ID_SPI3:
> +	case PERIPH_ID_SPI4:
> +		src = readl(&clk->src_isp);
> +		div = readl(&clk->div_isp1);
> +		sub_div = readl(&clk->div_isp1);
> +		break;
> +	case PERIPH_ID_SDMMC0:
> +	case PERIPH_ID_SDMMC1:
> +	case PERIPH_ID_SDMMC2:
> +	case PERIPH_ID_SDMMC3:
> +		src = readl(&clk->src_fsys);
> +		div = readl(&clk->div_fsys1);
> +		break;
> +	case PERIPH_ID_I2C0:
> +	case PERIPH_ID_I2C1:
> +	case PERIPH_ID_I2C2:
> +	case PERIPH_ID_I2C3:
> +	case PERIPH_ID_I2C4:
> +	case PERIPH_ID_I2C5:
> +	case PERIPH_ID_I2C6:
> +	case PERIPH_ID_I2C7:
> +	case PERIPH_ID_I2C8:
> +	case PERIPH_ID_I2C9:
> +	case PERIPH_ID_I2C10:
> +		sclk = exynos542x_get_pll_clk(MPLL);
> +		sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
> +								& 0x7) + 1;
> +		return sclk / sub_div;
> +	default:
> +		debug("%s: invalid peripheral %d", __func__, peripheral);
> +		return -1;
> +	};
> +
> +	src = (src >> bit_info->src_bit) & 0xf;
> +
> +	switch (src) {
> +	case EXYNOS542x_SRC_MPLL:
> +		sclk = exynos542x_get_pll_clk(MPLL);
> +		break;
> +	case EXYNOS542x_SRC_EPLL:
> +		sclk = exynos542x_get_pll_clk(EPLL);
> +		break;
> +	case EXYNOS542x_SRC_RPLL:
> +		sclk = exynos542x_get_pll_clk(RPLL);
> +		break;
> +	default:
> +		return 0;
> +	}
> +
> +	/* Ratio clock division for this peripheral */
> +	div = (div >> bit_info->div_bit) & 0xf;
> +	sub_clk = sclk / (div + 1);
> +
> +	if (bit_info->prediv_bit >= 0) {
> +		sub_div = (sub_div >> bit_info->prediv_bit) & 0xff;
> +		return sub_clk / (sub_div + 1);
> +	}
> +
> +	return sub_clk;
> +}
> +
>  unsigned long clock_get_periph_rate(int peripheral)
>  {
> -	if (cpu_is_exynos5())
> +	if (cpu_is_exynos5()) {
> +		if (proid_is_exynos5420() || proid_is_exynos5800())
> +			return exynos542x_get_periph_rate(peripheral);
>  		return exynos5_get_periph_rate(peripheral);
> -	else
> +	} else {
>  		return 0;
> +	}
>  }
>  
>  /* exynos4: return ARM clock frequency */
> diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
> index db24dc0..606b3ef 100644
> --- a/arch/arm/include/asm/arch-exynos/clk.h
> +++ b/arch/arm/include/asm/arch-exynos/clk.h
> @@ -23,8 +23,9 @@
>  #define SET_RATIO(x, y)		((y & 0xf) << (x << 4))
>  
>  enum pll_src_bit {
> -	EXYNOS_SRC_MPLL = 6,
> -	EXYNOS_SRC_EPLL,
> +	EXYNOS542x_SRC_MPLL = 3,
> +	EXYNOS_SRC_MPLL = EXYNOS542x_SRC_EPLL = 6,
> +	EXYNOS_SRC_EPLL = EXYNOS542x_SRC_RPLL,
>  	EXYNOS_SRC_VPLL,
>  };

Could you use one item by one line like below?

diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index db24dc0..da9bfcd 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -26,6 +26,9 @@ enum pll_src_bit {
 	EXYNOS_SRC_MPLL = 6,
 	EXYNOS_SRC_EPLL,
 	EXYNOS_SRC_VPLL,
+	EXYNOS542x_SRC_MPLL = 3,
+	EXYNOS542x_SRC_EPLL = 6,
+	EXYNOS542x_SRC_RPLL,
 };
 
 unsigned long get_pll_clk(int pllreg);

Thanks.


More information about the U-Boot mailing list