[U-Boot] [PATCH v1 6/8] dtt: add ds620 support

[Albert ARIBAUD (3ADEV)]

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud at 3adev.fr>
---

 drivers/hwmon/Makefile |  1 +
 drivers/hwmon/ds620.c  | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dtt.h          | 15 ++++++------
 3 files changed, 73 insertions(+), 7 deletions(-)
 create mode 100644 drivers/hwmon/ds620.c

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 25b8e8a..b4fb057 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_DTT_ADT7460) += adt7460.o
 obj-$(CONFIG_DTT_DS1621) += ds1621.o
 obj-$(CONFIG_DTT_DS1722) += ds1722.o
 obj-$(CONFIG_DTT_DS1775) += ds1775.o
+obj-$(CONFIG_DTT_DS620) += ds620.o
 obj-$(CONFIG_DTT_LM63) += lm63.o
 obj-$(CONFIG_DTT_LM73) += lm73.o
 obj-$(CONFIG_DTT_LM75) += lm75.o
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
new file mode 100644
index 0000000..b9a60fc
--- /dev/null
+++ b/drivers/hwmon/ds620.c
@@ -0,0 +1,64 @@
+/*
+ * DS620 DTT support
+ * (C) Copyright 2014 3ADEV <http://www.3adev.com>
+ * Written-by: Albert ARIBAUD <albert.aribaud at 3adev.fr>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Dallas Semiconductor's DS1621/1631 Digital Thermometer and Thermostat.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <dtt.h>
+
+/*
+ * Device code
+ */
+#define DTT_I2C_DEV_CODE	0x48
+#define DTT_START_CONVERT	0x51
+#define DTT_TEMP		0xAA
+#define DTT_CONFIG		0xAC
+
+/*
+ * Config register MSB bits
+ */
+#define DTT_CONFIG_1SHOT	0x01
+#define DTT_CONFIG_AUTOC	0x02
+#define DTT_CONFIG_R0		0x04 /* always 1 */
+#define DTT_CONFIG_R1		0x08 /* always 1 */
+#define DTT_CONFIG_TLF	0x10
+#define DTT_CONFIG_THF	0x20
+#define DTT_CONFIG_NVB	0x40
+#define DTT_CONFIG_DONE	0x80
+
+#define CHIP(sensor) (DTT_I2C_DEV_CODE + (sensor & 0x07))
+
+int dtt_init_one(int sensor)
+{
+	uint8_t config = DTT_CONFIG_1SHOT
+			| DTT_CONFIG_R0
+			| DTT_CONFIG_R1;
+	return i2c_write(CHIP(sensor), DTT_CONFIG, 1, &config, 1);
+}
+
+int dtt_get_temp(int sensor)
+{
+	uint8_t status;
+	uint8_t temp[2];
+
+	/* Start a conversion, may take up to 1 second. */
+	i2c_write(CHIP(sensor), DTT_START_CONVERT, 1, NULL, 0);
+	do {
+		if (i2c_read(CHIP(sensor), DTT_CONFIG, 1, &status, 1))
+			/* bail out if I2C error */
+			status |= DTT_CONFIG_DONE;
+	} while (!(status & DTT_CONFIG_DONE));
+	if (i2c_read(CHIP(sensor), DTT_TEMP, 1, temp, 2))
+		/* bail out if I2C error */
+		return -274; /* below absolute zero == error */
+
+	return ((int16_t)(temp[1] | (temp[0] << 8))) >> 7;
+}
diff --git a/include/dtt.h b/include/dtt.h
index 058bca4..173159d 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -12,13 +12,14 @@
 #define _DTT_H_
 
 #if defined(CONFIG_DTT_ADM1021)	|| \
-    defined(CONFIG_DTT_ADT7460)	|| \
-    defined(CONFIG_DTT_DS1621)	|| \
-    defined(CONFIG_DTT_DS1775)	|| \
-    defined(CONFIG_DTT_LM63)	|| \
-    defined(CONFIG_DTT_LM73)	|| \
-    defined(CONFIG_DTT_LM75)	|| \
-    defined(CONFIG_DTT_LM81)
+	defined(CONFIG_DTT_ADT7460)	|| \
+	defined(CONFIG_DTT_DS1621)	|| \
+	defined(CONFIG_DTT_DS1775)	|| \
+	defined(CONFIG_DTT_DS620)	|| \
+	defined(CONFIG_DTT_LM63)	|| \
+	defined(CONFIG_DTT_LM73)	|| \
+	defined(CONFIG_DTT_LM75)	|| \
+	defined(CONFIG_DTT_LM81)
 
 #define CONFIG_DTT				/* We have a DTT */
 
-- 
2.1.0