[U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI

[Thierry Reding]

On Fri, Jan 16, 2015 at 04:11:19PM +0000, Ian Campbell wrote:
> On Fri, 2015-01-16 at 17:03 +0100, Thierry Reding wrote:
> > On Fri, Jan 16, 2015 at 10:24:03AM +0000, Ian Campbell wrote:
> > > On Fri, 2015-01-16 at 11:05 +0100, Thierry Reding wrote:
> > > > On Fri, Jan 16, 2015 at 09:43:22AM +0000, Ian Campbell wrote:
> > > > > On Thu, 2015-01-15 at 15:55 +0100, Thierry Reding wrote:
> > > > > > On Wed, Jan 14, 2015 at 08:58:41AM +0000, Ian Campbell wrote:
> > > > > > > On Wed, 2015-01-14 at 08:57 +0100, Thierry Reding wrote:
> > > > > > > > > I also pushed my tree to gitorious:
> > > > > > > > >         https://gitorious.org/ijc/u-boot jetson-psci-v1
> > > > > > > > > 
> > > > > > > > > I would Ack your patch, but I don't think you've posted it and it has no
> > > > > > > > > S-o-b so that would seem a bit premature/rude of me. For the same reason
> > > > > > > > > I've not actually included it in the series posted (but it is in the
> > > > > > > > > gitorious branch).
> > > > > > > > 
> > > > > > > > Feel free to take ownership of that patch. I currently don't have the
> > > > > > > > time to work on this and it seems you've made good progress on it.
> > > > > > > 
> > > > > > > Will do. Could you offer a S-o-b for it please so I can pick it up.
> > > > > > 
> > > > > > Sure:
> > > > > > 
> > > > > > Signed-off-by: Thierry Reding <treding at nvidia.com>
> > > > > 
> > > > > Thanks!
> > > > > 
> > > > > > > > It could probably use some cleanup because there's a bit of debug output
> > > > > > > > still in there. Also...
> > > > > > > > 
> > > > > > > > > FWIW I think you could drop your stub versions of psci_cpu_off and
> > > > > > > > > psci_cpu_suspend (assuming you don't want to implement them) since the
> > > > > > > > > common code has stubs.
> > > > > > > > 
> > > > > > > > ... I'd think you'd need to implement these so that you can get proper
> > > > > > > > suspend/resume support in the kernel. I've had to disable cpuidle (via
> > > > > > > > #undef CONFIG_PM_SLEEP in arch/arm/mach-tegra/cpuidle-tegra114.c) in the
> > > > > > > > kernel to make that code not powergate CPUs. Ideally I think the kernel
> > > > > > > > would check that it's running with PSCI support and disable the cpuidle
> > > > > > > > driver. Maybe that could be done by introducing a new cpuidle driver
> > > > > > > > that checks for PSCI availability and uses it when present.
> > > > > > > 
> > > > > > > Hrm, I'm not sure how this all fits together, it's not a problem I've
> > > > > > > noted before.
> > > > > > > 
> > > > > > > FWIW I think cpu_off and cpu_suspend are optional in PSCI v0.1 so an
> > > > > > > initial version doesn't necessarily need to implement them (sunxi
> > > > > > > doesn't for example), but as you say they do enable useful features.
> > > > > > 
> > > > > > I think when I tried last time, without disable the cpuidle driver
> > > > > > things would hang at boot. I would expect that problem to exist for
> > > > > > any board. Perhaps you've disabled PM_SLEEP in your config?
> > > > > 
> > > > > I don't think so:
> > > > > # grep PM_SLEEP /boot/config-3.18.0-trunk-armmp-lpae 
> > > > > CONFIG_PM_SLEEP=y
> > > > > CONFIG_PM_SLEEP_SMP=y
> > > > > CONFIG_PM_SLEEP_DEBUG=y
> > > > > 
> > > > > I don't see anything about cpuidle in dmesg either.
> > > > > 
> > > > > Did you perhaps mean CPU_IDLE rather than PM_SLEEP because:
> > > > > # CONFIG_CPU_IDLE is not set
> > > > 
> > > > Yes, I think that would have the same effect as disable PM_SLEEP (at
> > > > least regarding the powergate stuff that's conflicting with the PSCI
> > > > implementation).
> > > > 
> > > > Note also, as mentioned in another reply, that with the PSCI support
> > > > there's now two sources that can simultaneously access the powergate
> > > > functionality in the PMC. We have some locking in place to make sure
> > > > that concurrent accesses from within the kernel are serialized, but
> > > > there's no mechanism in place to protect from concurrent accesses in
> > > > secure firmware and the kernel.
> > > 
> > > The docs are on another machine, but I take it the PMC registers are
> > > available to NS mode? Is that configurable (from S mode) perhaps?
> > 
> > I don't see how that's relevant. Even if it was possible to secure the
> > registers against access from NS mode, there's no way we could do that
> > because many drivers rely on controlling their power domain using that
> > functionality.
> > 
> > Or perhaps I misunderstand what you're suggesting.
> 
> If the PMC registers aren't available to NS then the damage the
> powergate driver can do by conflicting with PSCI is more limited i.e not
> going to fry the h/w somehow.

As far as I can tell these registers are available in NS mode. They have
to because a bunch of drivers rely on it. The powergate driver controls
not only CPU power domains, but also display, SATA, PCIe and so on.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150119/f37a87b3/attachment.pgp>