[U-Boot] [linux-sunxi] [u-boot 2/2] sun5i: bump DEBE priority (useful on a10s only)

[Michal Suchanek]

On 19 January 2015 at 10:29, Hans de Goede <hdegoede at redhat.com> wrote:
> Hi,
>
>
> On 19-01-15 10:16, Hans de Goede wrote:
>>
>> Hi,
>>
>> On 19-01-15 10:06, Michal Suchanek wrote:
>>>
>>> On 19 January 2015 at 05:29, Siarhei Siamashka
>>> <siarhei.siamashka at gmail.com> wrote:
>>>>
>>>> On Sun, 04 Jan 2015 20:49:38 +0100
>>>> Hans de Goede <hdegoede at redhat.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> On 04-01-15 20:19, Michal Suchanek wrote:
>>>>>>
>>>>>>     Setting magic 'reserved' hpcr bit on sun5i DEBE seems required for
>>>>>>     smooth HDMI scanout of large frambuffer (eg. 1080p).
>>>>>>
>>>>>>     This fix comes at the cost of some overall memory bandwidth so it
>>>>>>     might be appropriate to detect a10s and only apply there (and not
>>>>>> a13).
>>>>>
>>>>>
>>>>> Hmm, Sairhei is the expert on this, adding him to the Cc. Sairhei, what
>>>>> do you think of the proposed change ?
>>>>
>>>>
>>>> I don't have A10s hardware, so have no idea and can't test anything
>>>> myself.
>>>>
>>>> It would be great to have a better description of what exactly is
>>>> happening before the patch. And precisely how the patch is helping.
>>>> A description of the test setup and benchmark numbers would be
>>>> appreciated. And it would be perfect if somebody else could reproduce
>>>> the test and confirm the results.
>>>
>>>
>>> The result is that with full HD HDMI output lima-memtester cube jumps
>>> without the patch and does not jump with the patch. I have only 1 A10s
>>> board.
>>
>>
>> Since you're running lima-memtester, I assume you're using a sunxi-3.4
>> kernel, correct?
>>
>> Looking at the patch you're not modifying DEBE DRAM priority, but rather
>> DEFE priority.
>>
>> Can you check the fex file and see what fb0_scaler_mode_enable is set too
>> ?
>>
>> If it is not enabled, it is weird that this fix helps, if it is enabled,
>> then this fix shouldn't be necessary, but maybe things are different on
>> sun5i vs sun4i.
>>
>> Regardless can you try with fb0_scaler_mode_enable inverted from what it
>> is now, it would be good to know if it has any impact on sun5i.
>
>
> Also instead of changing the priority to 0x1037, can you try changing it to
> 0x5031, this is what sun4i uses after Siarhei's fixes, and perhaps it is the
> right value to use for DEFE everywhere in general.
>

That did not work for me.

Thanks

Michal