[U-Boot] [PATCH v2 24/26] dm: cros_ec: Move cros_ec_i2c over to driver model
Simon Glass
sjg at chromium.org
Tue Jan 20 04:12:53 CET 2015
Update the driver model support, and remove the old code. Change snow to
use this new support.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Add patches to tidy up cros_ec using new I2C/SPI features
drivers/misc/cros_ec_i2c.c | 107 +++++++++++++++++----------------------------
include/configs/snow.h | 5 +++
2 files changed, 45 insertions(+), 67 deletions(-)
diff --git a/drivers/misc/cros_ec_i2c.c b/drivers/misc/cros_ec_i2c.c
index 513cdb1..c9d1b49 100644
--- a/drivers/misc/cros_ec_i2c.c
+++ b/drivers/misc/cros_ec_i2c.c
@@ -14,20 +14,16 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <i2c.h>
#include <cros_ec.h>
-#ifdef DEBUG_TRACE
-#define debug_trace(fmt, b...) debug(fmt, #b)
-#else
-#define debug_trace(fmt, b...)
-#endif
-
-int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
+int cros_ec_i2c_command(struct udevice *udev, uint8_t cmd, int cmd_version,
const uint8_t *dout, int dout_len,
uint8_t **dinp, int din_len)
{
- int old_bus = 0;
+ struct cros_ec_dev *dev = udev->uclass_priv;
/* version8, cmd8, arglen8, out8[dout_len], csum8 */
int out_bytes = dout_len + 4;
/* response8, arglen8, in8[din_len], checksum8 */
@@ -37,19 +33,17 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
uint8_t *in_ptr;
int len, csum, ret;
- old_bus = i2c_get_bus_num();
-
/*
* Sanity-check I/O sizes given transaction overhead in internal
* buffers.
*/
if (out_bytes > sizeof(dev->dout)) {
debug("%s: Cannot send %d bytes\n", __func__, dout_len);
- return -1;
+ return -ENOSPC;
}
if (in_bytes > sizeof(dev->din)) {
debug("%s: Cannot receive %d bytes\n", __func__, din_len);
- return -1;
+ return -ENOSPC;
}
assert(dout_len >= 0);
assert(dinp);
@@ -72,7 +66,7 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
/* Something we don't support */
debug("%s: Protocol version %d unsupported\n",
__func__, dev->protocol_version);
- return -1;
+ return -EPROTONOSUPPORT;
}
*ptr++ = EC_CMD_VERSION0 + cmd_version;
@@ -86,36 +80,18 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
*ptr++ = (uint8_t)
cros_ec_calc_checksum(dev->dout, dout_len + 3);
- /* Set to the proper i2c bus */
- if (i2c_set_bus_num(dev->bus_num)) {
- debug("%s: Cannot change to I2C bus %d\n", __func__,
- dev->bus_num);
- return -1;
- }
-
/* Send output data */
cros_ec_dump_data("out", -1, dev->dout, out_bytes);
- ret = i2c_write(dev->addr, 0, 0, dev->dout, out_bytes);
- if (ret) {
- debug("%s: Cannot complete I2C write to 0x%x\n",
- __func__, dev->addr);
- ret = -1;
- }
+ ret = dm_i2c_write(udev, 0, dev->dout, out_bytes);
+ if (ret)
+ debug("%s: Cannot complete I2C write\n", udev->name);
if (!ret) {
- ret = i2c_read(dev->addr, 0, 0, in_ptr, in_bytes);
- if (ret) {
- debug("%s: Cannot complete I2C read from 0x%x\n",
- __func__, dev->addr);
- ret = -1;
- }
+ ret = dm_i2c_read(udev, 0, in_ptr, in_bytes);
+ if (ret)
+ debug("%s: Cannot complete I2C read\n", udev->name);
}
- /* Return to original bus number */
- i2c_set_bus_num(old_bus);
- if (ret)
- return ret;
-
if (*in_ptr != EC_RES_SUCCESS) {
debug("%s: Received bad result code %d\n", __func__, *in_ptr);
return -(int)*in_ptr;
@@ -125,13 +101,13 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
if (len + 3 > sizeof(dev->din)) {
debug("%s: Received length %#02x too large\n",
__func__, len);
- return -1;
+ return -ENOSPC;
}
csum = cros_ec_calc_checksum(in_ptr, 2 + len);
if (csum != in_ptr[2 + len]) {
debug("%s: Invalid checksum rx %#02x, calced %#02x\n",
__func__, in_ptr[2 + din_len], csum);
- return -1;
+ return -EBADMSG;
}
din_len = min(din_len, len);
cros_ec_dump_data("in", -1, in_ptr, din_len + 3);
@@ -142,35 +118,32 @@ int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
return din_len;
}
-int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob)
+static int cros_ec_probe(struct udevice *dev)
{
- /* Decode interface-specific FDT params */
- dev->max_frequency = fdtdec_get_int(blob, dev->node,
- "i2c-max-frequency", 100000);
- dev->bus_num = i2c_get_bus_num_fdt(dev->parent_node);
- if (dev->bus_num == -1) {
- debug("%s: Failed to read bus number\n", __func__);
- return -1;
- }
- dev->addr = fdtdec_get_int(blob, dev->node, "reg", -1);
- if (dev->addr == -1) {
- debug("%s: Failed to read device address\n", __func__);
- return -1;
- }
+ struct dm_i2c_chip *plat = dev_get_parent_platdata(dev);
- return 0;
+ /*
+ * The EC does not use register offsets. This might be better done
+ * with a device tree property, like "i2c-offset-len = <0>" but for
+ * now this works.
+ */
+ plat->offset_len = 0;
+ return cros_ec_register(dev);
}
-/**
- * Initialize I2C protocol.
- *
- * @param dev CROS_EC device
- * @param blob Device tree blob
- * @return 0 if ok, -1 on error
- */
-int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob)
-{
- i2c_init(dev->max_frequency, dev->addr);
-
- return 0;
-}
+static struct dm_cros_ec_ops cros_ec_ops = {
+ .command = cros_ec_i2c_command,
+};
+
+static const struct udevice_id cros_ec_ids[] = {
+ { .compatible = "google,cros-ec" },
+ { }
+};
+
+U_BOOT_DRIVER(cros_ec_i2c) = {
+ .name = "cros_ec",
+ .id = UCLASS_CROS_EC,
+ .of_match = cros_ec_ids,
+ .probe = cros_ec_probe,
+ .ops = &cros_ec_ops,
+};
diff --git a/include/configs/snow.h b/include/configs/snow.h
index 7eaa586..3e5a5d3 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -16,12 +16,17 @@
#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
#define CONFIG_SPI_BOOTING
+#define CONFIG_DM_I2C
+
#include <configs/exynos5250-common.h>
#include <configs/exynos5-dt-common.h>
#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
#define CONFIG_POWER_TPS65090_I2C
+#define CONFIG_DM_CROS_EC
+#define CONFIG_DM_I2C_COMPAT
+#undef CONFIG_SYS_I2C
#define CONFIG_BOARD_COMMON
#define CONFIG_ARCH_EARLY_INIT_R
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list