[U-Boot] [PATCH 2/5] Enable booting of mx28 without battery

[Fabio Estevam]

Hi Graeme,

On Wed, Jan 21, 2015 at 9:55 AM, Graeme Russ <gruss at tss-engineering.com> wrote:
> Section 4.1.2 of Freescale Application Note AN4199 describes the
> configuration required to operate the mx28 from a 5V source without a
> battery. This patch implements the changes to the Freescale bootlets
> which allow this configuration to properly boot the mx28 processor
>
> Signed-off-by: Graeme Russ <gruss at tss-engineering.com>
> ---
>
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 190 +++++++++++++++++++++++++++-
>  doc/README.mxs                              |  10 ++

Damien posted today a new version of this patch in the imx community,
which is a lot simpler.

Could you please try it?

Thanks