[U-Boot] Please pull u-boot-mpc85xx master

[York Sun]

The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:

  Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16 10:25:01 -0500)

are available in the git repository at:


  git://git.denx.de/u-boot-mpc85xx.git master

for you to fetch changes up to db4a1767c09a4696792204d1cac33631cb38424e:

  board/T1040rdb: Add VSC9953 support for T1040rdb board (2015-01-21 09:23:36 -0600)

----------------------------------------------------------------
Aneesh Bansal (1):
      powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure Boot

Chunhe Lan (1):
      powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW

Codrin Ciubotariu (11):
      net/fm: Fix error when FMAN MAC has no PHY
      arch/powerpc: Fix mapping of Freescale SerDes protocols
      arch/powerpc: Add SGMII support for the L2 Switch ports
      net/fm: Enable FMAN ports if l2switch ports are connected over SGMII
      net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
      arch/powerpc: Initialize VSC9953 L2 Switch
      board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89
      board/T1040qds: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs
      board/T104xrdb: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs
      board/T1040qds: Add VSC9953 support for T1040qds board
      board/T1040rdb: Add VSC9953 support for T1040rdb board

Po Liu (1):
      powerpc/c29xpcie: Add secure boot support

Ruchika Gupta (1):
      powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROL

Shaohui Xie (1):
      phylib: add support for aquantia PHYs

Shengzhou Liu (3):
      powerpc/t1024: add serdes protocol 0x40 and 0x5f
      t1024qds: add missing T1024QDS_defconfig
      powerpc/t1024rdb: Add support for T1024RDB-PB

Tudor Laurentiu (1):
      b4860: Correct LIODN assignment for PCIe

gaurav rana (2):
      powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS
      powerpc: SECURE BOOT- Add secure boot target for T1042RDB

harninder rai (1):
      powerpc/913x: Add config flag for bootdelay

tang yuantian (4):
      mpc85xx/t102xrdb: convert deep sleep to generic board interface
      mpc85xx/t102xqds: convert deep sleep to generic board interface
      mpc85xx/t1040qds: convert deep sleep to generic board interface
      mpc85xx: clean up the old deep sleep framework

 arch/powerpc/cpu/mpc85xx/b4860_ids.c           |    2 +-
 arch/powerpc/cpu/mpc85xx/cpu_init.c            |   10 +-
 arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c |   73 ++--
 arch/powerpc/cpu/mpc85xx/t1024_serdes.c        |    2 +
 arch/powerpc/cpu/mpc85xx/t1040_serdes.c        |    8 +-
 arch/powerpc/cpu/mpc8xxx/cpu.c                 |    5 +
 arch/powerpc/include/asm/arch-mpc85xx/gpio.h   |   15 +
 arch/powerpc/include/asm/fsl_secure_boot.h     |    2 +
 arch/powerpc/include/asm/fsl_serdes.h          |    7 +
 arch/powerpc/lib/board.c                       |   21 -
 board/freescale/c29xpcie/MAINTAINERS           |    2 +
 board/freescale/corenet_ds/MAINTAINERS         |    1 +
 board/freescale/t102xqds/ddr.c                 |   19 +
 board/freescale/t102xqds/t102xqds.c            |   23 +-
 board/freescale/t102xrdb/cpld.h                |    4 +
 board/freescale/t102xrdb/ddr.c                 |   19 +
 board/freescale/t102xrdb/eth_t102xrdb.c        |   30 +-
 board/freescale/t102xrdb/spl.c                 |    7 +
 board/freescale/t102xrdb/t102xrdb.c            |   54 ++-
 board/freescale/t1040qds/ddr.c                 |   19 +
 board/freescale/t1040qds/eth.c                 |   93 +++++
 board/freescale/t1040qds/t1040qds.c            |   23 +-
 board/freescale/t104xrdb/MAINTAINERS           |    1 +
 board/freescale/t104xrdb/eth.c                 |   59 ++-
 board/freescale/t4rdb/eth.c                    |    2 +-
 board/freescale/t4rdb/t4_rcw.cfg               |    4 +-
 configs/C29XPCIE_NOR_SECBOOT_defconfig         |    4 +
 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig    |    4 +
 configs/P5040DS_SECURE_BOOT_defconfig          |    4 +
 configs/T1024QDS_defconfig                     |    4 +
 configs/T1042RDB_SECURE_BOOT_defconfig         |    4 +
 doc/README.t1040-l2switch                      |   48 +++
 drivers/net/Makefile                           |    1 +
 drivers/net/fm/eth.c                           |   30 +-
 drivers/net/fm/t1040.c                         |    3 +-
 drivers/net/phy/Makefile                       |    1 +
 drivers/net/phy/aquantia.c                     |  156 ++++++++
 drivers/net/phy/phy.c                          |    3 +
 drivers/net/vsc9953.c                          |  497 ++++++++++++++++++++++++
 include/configs/BSC9131RDB.h                   |    1 +
 include/configs/BSC9132QDS.h                   |    1 +
 include/configs/C29XPCIE.h                     |    2 +
 include/configs/T102xQDS.h                     |    3 +
 include/configs/T102xRDB.h                     |   23 +-
 include/configs/T1040QDS.h                     |    9 +
 include/configs/T104xRDB.h                     |    8 +
 include/phy.h                                  |    1 +
 include/vsc9953.h                              |  402 +++++++++++++++++++
 48 files changed, 1582 insertions(+), 132 deletions(-)
 create mode 100644 arch/powerpc/include/asm/arch-mpc85xx/gpio.h
 create mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig
 create mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
 create mode 100644 configs/P5040DS_SECURE_BOOT_defconfig
 create mode 100644 configs/T1024QDS_defconfig
 create mode 100644 configs/T1042RDB_SECURE_BOOT_defconfig
 create mode 100644 doc/README.t1040-l2switch
 create mode 100644 drivers/net/phy/aquantia.c
 create mode 100644 drivers/net/vsc9953.c
 create mode 100644 include/vsc9953.h

Thanks.

York