[U-Boot] [v2 PATCH 2/3] arm: mxs: Enable booting of mx28 without battery

[Fabio Estevam]

Hi Graeme,

This looks so much better!

On Sat, Jan 24, 2015 at 1:32 AM, Graeme Russ <gruss at tss-engineering.com> wrote:
> Section 4.1.2 of Freescale Application Note AN4199 describes the
> configuration required to operate the mx28 from a 5V source without a
> battery. This patch implements the changes to the Freescale bootlets

Minor nit in case you send a v3: we are not implementing changes to
the FSL bootlets. We are changing U-boot code ;-)

> which allow this configuration to properly boot the mx28 processor
>
> Signed-off-by: Graeme Russ <gruss at tss-engineering.com>
> Signed-off-by: Damien Gotfroi <dgotfroi at greenwatch.be>

Acked-by: Fabio Estevam <fabio.estevam at freescale.com>

Thanks for working on this Damien and Graeme.