[U-Boot] [PATCH v3 0/26] dm: Add additional bus functionality
Simon Glass
sjg at chromium.org
Sun Jan 25 16:26:54 CET 2015
The current bus implementation is simple but leaves some things to drivers
which are better handled in the uclass.
At present uclasses cannot provide a common way of dealing with children
(i.e. devices on the bus), so we have duplication in the drivers. The same
code is repeated in each driver when it would be better to put it in the
uclass.
Secondly, we don't have the concept of per-child platform data for devices
on the bus. Instead the per-child data can only exist when the child is
actually probed. This is not really suitable. Examples of things we want to
know before a child is probed are:
- chip address (for I2C)
- chip select (for SPI)
- device address (for PCI)
These things are static and do not change when the device is probed and
removed. In some cases (such as SPI mode and maximum speed), the data may
be copied to run-time data when the device is probed. It may then be changed
while the driver is active, but the original platform data is never changed
by drivers once it is set up.
To address these issues, additional functions are added:
- per-child platform data, which can be defined by the uclass and (if
necessary) overriden by the bus driver. This allows the bus's uclass to
provide some consistency here
- per-child post-bind and pre-probe methods in the uclass. These allow the
bus uclass to set up the per-child platform data, and also to do any
last-minute adjustments before the child is probed.
With these changes, some code can be removed from the existing I2C and SPI
drivers and this has been done as part of this series.
With this series I2C and SPI are tested on:
- jetson-tk1 (Tegra 124)
- beaver (Tegra 30)
- seaboard (Tegra 20, I2C only)
- trimslice (Tegra 20, SPI only)
- snow (Exynos 5250)
- pit (Exynos 5420, note I2C probe is previously broken)
- link (x86)
- sandbox
Note: Some of these changes were previously included in the DM PCI RFC. This
series is available at u-boot-dm/i2c-working.
Changes in v3:
- Add missing 'static' to two functions
- Change variable name from parent_drv to uc_drv
- Fix comment to say 'node references' instead of 'phandles'
- Fix stale comment in device_probe_child()
- Fix typo in commit subject
- Remove unnecessary check that dev->parent_platdata is NULL
- Remove unnecessary per_child_auto_alloc_size value
Changes in v2:
- Add a TODO to remove struct dm_spi_bus
- Add additional comments to spi.h
- Add new patch to provide an offset length parameter where needed
- Add patches to tidy up cros_ec using new I2C/SPI features
- Copy max_hz and mode from platdata to spi_slave when probing
- Drop RFC prefix since this series has been properly tested now
- Tidy up soft_spi driver also
- Update commit message to describe immuatable platform data
- Update the spi-howto docs
Simon Glass (26):
dm: i2c: Provide an offset length parameter where needed
dm: Don't run tests if U-Boot cannot be built
dm: core: Improve comments for uclass_first/next_device()
dm: core: Set device tree node for root device
dm: core: Tidy up error handling in device_bind()
dm: core: Allocate platform data when binding a device
dm: core: Allow parents to have platform data for their children
dm: core: Allow uclasses to specify platdata for a device's children
dm: core: Add a post_bind method for parents
dm: core: Add a function to get a device's uclass ID
dm: core: Add a flag to control sequence numbering
dm: core: Allow uclasses to specify private data for a device's
children
dm: spi: Move the per-child data size to the uclass
dm: core: Allow the uclass to set up a device's child after binding
dm: sandbox: sf: Tidy up the error handling in sandbox_sf_probe()
dm: core: Allow uclass to set up a device's child before it is probed
dm: spi: Set up the spi_slave device pointer in child_pre_probe()
dm: spi: Move slave details to child platdata
dm: i2c: Move slave details to child platdata
dm: tegra: Drop unused COMPAT features for I2C, SPI
dm: exynos: Drop unused COMPAT features for SPI
dm: core: Ignore disabled devices when binding
dm: cros_ec: Don't require protocol 3 support
dm: cros_ec: Move cros_ec_i2c over to driver model
dm: cros_ec_spi: Remove old pre-driver-model code
dm: Update documentation for new bus features
arch/arm/cpu/tegra20-common/pmu.c | 2 +-
board/avionic-design/common/tamonten-ng.c | 2 +-
board/nvidia/cardhu/cardhu.c | 4 +-
board/nvidia/dalmore/dalmore.c | 4 +-
board/nvidia/whistler/whistler.c | 4 +-
board/toradex/apalis_t30/apalis_t30.c | 2 +-
common/cmd_i2c.c | 2 +-
doc/driver-model/README.txt | 91 +++++------
doc/driver-model/spi-howto.txt | 40 ++++-
drivers/core/device-remove.c | 16 +-
drivers/core/device.c | 121 +++++++++++----
drivers/core/root.c | 8 +
drivers/core/uclass.c | 34 +++-
drivers/i2c/i2c-uclass-compat.c | 2 +-
drivers/i2c/i2c-uclass.c | 69 +++++----
drivers/i2c/i2c-uniphier-f.c | 12 --
drivers/i2c/i2c-uniphier.c | 12 --
drivers/i2c/s3c24x0_i2c.c | 12 --
drivers/i2c/sandbox_i2c.c | 30 +---
drivers/i2c/tegra_i2c.c | 18 ---
drivers/misc/cros_ec.c | 10 +-
drivers/misc/cros_ec_i2c.c | 107 +++++--------
drivers/misc/cros_ec_spi.c | 70 +--------
drivers/mtd/spi/sandbox.c | 12 +-
drivers/mtd/spi/sf_probe.c | 3 +-
drivers/power/as3722.c | 2 +-
drivers/serial/serial-uclass.c | 1 +
drivers/spi/cadence_qspi.c | 1 -
drivers/spi/designware_spi.c | 1 -
drivers/spi/exynos_spi.c | 1 -
drivers/spi/sandbox_spi.c | 1 -
drivers/spi/soft_spi.c | 10 --
drivers/spi/spi-uclass.c | 95 ++++++++----
drivers/spi/tegra114_spi.c | 1 -
drivers/spi/tegra20_sflash.c | 1 -
drivers/spi/tegra20_slink.c | 1 -
include/configs/snow.h | 5 +
include/dm/device.h | 29 ++++
include/dm/test.h | 3 +
include/dm/uclass-internal.h | 11 ++
include/dm/uclass.h | 21 +++
include/fdtdec.h | 7 -
include/i2c.h | 12 +-
include/spi.h | 42 +++--
lib/fdtdec.c | 7 -
test/dm/bus.c | 250 +++++++++++++++++++++++++++++-
test/dm/core.c | 11 ++
test/dm/i2c.c | 10 +-
test/dm/spi.c | 6 +-
test/dm/test-dm.sh | 9 +-
test/dm/test-fdt.c | 20 ++-
test/dm/test.dts | 16 ++
52 files changed, 813 insertions(+), 448 deletions(-)
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list