[U-Boot] [PATCH] drivers/net/e1000.c: fix compile warning under 64bit mode

York Sun yorksun at freescale.com
Mon Jan 26 16:25:17 CET 2015



On 01/21/2015 11:21 PM, Minghuan Lian wrote:
> Fix this:
> warning: cast from pointer to integer of different size
> 
> Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
> ---
>  drivers/net/e1000.c | 31 +++++++++++++++++--------------
>  1 file changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
> index 6531030..cd44222 100644
> --- a/drivers/net/e1000.c
> +++ b/drivers/net/e1000.c
> @@ -4927,22 +4927,23 @@ void
>  fill_rx(struct e1000_hw *hw)
>  {
>  	struct e1000_rx_desc *rd;
> -	uint32_t flush_start, flush_end;
> +	unsigned long flush_start, flush_end;
>  
>  	rx_last = rx_tail;
>  	rd = rx_base + rx_tail;
>  	rx_tail = (rx_tail + 1) % 8;
>  	memset(rd, 0, 16);
> -	rd->buffer_addr = cpu_to_le64((u32)packet);
> +	rd->buffer_addr = cpu_to_le64((unsigned long)packet);
>  
>  	/*
>  	 * Make sure there are no stale data in WB over this area, which
>  	 * might get written into the memory while the e1000 also writes
>  	 * into the same memory area.
>  	 */
> -	invalidate_dcache_range((u32)packet, (u32)packet + 4096);
> +	invalidate_dcache_range((unsigned long)packet,
> +				(unsigned long)packet + 4096);
>  	/* Dump the DMA descriptor into RAM. */
> -	flush_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1);
> +	flush_start = ((unsigned long)rd) & ~(ARCH_DMA_MINALIGN - 1);
>  	flush_end = flush_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN);
>  	flush_dcache_range(flush_start, flush_end);
>  
> @@ -4963,7 +4964,7 @@ e1000_configure_tx(struct e1000_hw *hw)
>  	unsigned long tipg, tarc;
>  	uint32_t ipgr1, ipgr2;
>  
> -	E1000_WRITE_REG(hw, TDBAL, (u32) tx_base);
> +	E1000_WRITE_REG(hw, TDBAL, (unsigned long)tx_base);
>  	E1000_WRITE_REG(hw, TDBAH, 0);
>  
>  	E1000_WRITE_REG(hw, TDLEN, 128);
> @@ -5107,7 +5108,7 @@ e1000_configure_rx(struct e1000_hw *hw)
>  		E1000_WRITE_FLUSH(hw);
>  	}
>  	/* Setup the Base and Length of the Rx Descriptor Ring */
> -	E1000_WRITE_REG(hw, RDBAL, (u32) rx_base);
> +	E1000_WRITE_REG(hw, RDBAL, (unsigned long)rx_base);
>  	E1000_WRITE_REG(hw, RDBAH, 0);
>  
>  	E1000_WRITE_REG(hw, RDLEN, 128);
> @@ -5138,14 +5139,14 @@ e1000_poll(struct eth_device *nic)
>  {
>  	struct e1000_hw *hw = nic->priv;
>  	struct e1000_rx_desc *rd;
> -	uint32_t inval_start, inval_end;
> +	unsigned long inval_start, inval_end;
>  	uint32_t len;
>  
>  	/* return true if there's an ethernet packet ready to read */
>  	rd = rx_base + rx_last;
>  
>  	/* Re-load the descriptor from RAM. */
> -	inval_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1);
> +	inval_start = ((unsigned long)rd) & ~(ARCH_DMA_MINALIGN - 1);
>  	inval_end = inval_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN);
>  	invalidate_dcache_range(inval_start, inval_end);
>  
> @@ -5154,8 +5155,9 @@ e1000_poll(struct eth_device *nic)
>  	/*DEBUGOUT("recv: packet len=%d \n", rd->length); */
>  	/* Packet received, make sure the data are re-loaded from RAM. */
>  	len = le32_to_cpu(rd->length);
> -	invalidate_dcache_range((u32)packet,
> -				(u32)packet + roundup(len, ARCH_DMA_MINALIGN));
> +	invalidate_dcache_range((unsigned long)packet,
> +				(unsigned long)packet +
> +				roundup(len, ARCH_DMA_MINALIGN));
>  	NetReceive((uchar *)packet, len);
>  	fill_rx(hw);
>  	return 1;
> @@ -5170,7 +5172,7 @@ static int e1000_transmit(struct eth_device *nic, void *txpacket, int length)
>  	struct e1000_hw *hw = nic->priv;
>  	struct e1000_tx_desc *txp;
>  	int i = 0;
> -	uint32_t flush_start, flush_end;
> +	unsigned long flush_start, flush_end;
>  
>  	txp = tx_base + tx_tail;
>  	tx_tail = (tx_tail + 1) % 8;
> @@ -5180,10 +5182,11 @@ static int e1000_transmit(struct eth_device *nic, void *txpacket, int length)
>  	txp->upper.data = 0;
>  
>  	/* Dump the packet into RAM so e1000 can pick them. */
> -	flush_dcache_range((u32)nv_packet,
> -			   (u32)nv_packet + roundup(length, ARCH_DMA_MINALIGN));
> +	flush_dcache_range((unsigned long)nv_packet,
> +			   (unsigned long)nv_packet +
> +			   roundup(length, ARCH_DMA_MINALIGN));
>  	/* Dump the descriptor into RAM as well. */
> -	flush_start = ((u32)txp) & ~(ARCH_DMA_MINALIGN - 1);
> +	flush_start = ((unsigned long)txp) & ~(ARCH_DMA_MINALIGN - 1);
>  	flush_end = flush_start + roundup(sizeof(*txp), ARCH_DMA_MINALIGN);
>  	flush_dcache_range(flush_start, flush_end);
>  
> 
Please consider phys_addr_t and phys_size_t.

York


More information about the U-Boot mailing list