[U-Boot] [PATCH v4 1/4] dm: i2c: dts: Support an offset-len device tree property
Simon Glass
sjg at chromium.org
Tue Jan 27 04:29:37 CET 2015
Since U-Boot can support different offset lengths (0-4 bytes), add a device
tree property to specify this. This avoids hard-coding it in the driver.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v4: None
doc/device-tree-bindings/i2c/i2c.txt | 28 ++++++++++++++++++++++++++++
drivers/i2c/i2c-uclass.c | 3 ++-
2 files changed, 30 insertions(+), 1 deletion(-)
create mode 100644 doc/device-tree-bindings/i2c/i2c.txt
diff --git a/doc/device-tree-bindings/i2c/i2c.txt b/doc/device-tree-bindings/i2c/i2c.txt
new file mode 100644
index 0000000..ea918dd
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/i2c.txt
@@ -0,0 +1,28 @@
+U-Boot I2C
+----------
+
+U-Boot's I2C model has the concept of an offset within a chip (I2C target
+device). The offset can be up to 4 bytes long, but is normally 1 byte,
+meaning that offsets from 0 to 255 are supported by the chip. This often
+corresponds to register numbers.
+
+Apart from the controller-specific I2C bindings, U-Boot supports a special
+property which allows the chip offset length to be selected.
+
+Optional properties:
+- u-boot,i2c-offset-len - length of chip offset in bytes. If omitted the
+ default value of 1 is used.
+
+
+Example
+-------
+
+i2c4: i2c at 12ca0000 {
+ cros-ec at 1e {
+ reg = <0x1e>;
+ compatible = "google,cros-ec";
+ i2c-max-frequency = <100000>;
+ u-boot,i2c-offset-len = <0>;
+ ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 393cd6f..eafa457 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -420,7 +420,8 @@ int i2c_deblock(struct udevice *bus)
int i2c_chip_ofdata_to_platdata(const void *blob, int node,
struct dm_i2c_chip *chip)
{
- chip->offset_len = 1; /* default */
+ chip->offset_len = fdtdec_get_int(gd->fdt_blob, node,
+ "u-boot,i2c-offset-len", 1);
chip->flags = 0;
chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1);
if (chip->chip_addr == -1) {
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list