[U-Boot] [PATCH v3 07/12] exynos5: pinmux: check flag for i2c config

[Przemyslaw Marczak]

Some versions of Exynos5 supports High-Speed I2C,
on few interfaces, this change allows support this.
The new flag is: PINMUX_FLAG_HS_MODE

Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Akshay Saraswat <akshay.s at samsung.com>
Cc: Minkyu Kang <mk7.kang at samsung.com>

---
Changes v3:
- add new flag: PINMUX_FLAG_HS_MODE
---
 arch/arm/cpu/armv7/exynos/pinmux.c        | 27 +++++++++++++++++++--------
 arch/arm/include/asm/arch-exynos/pinmux.h |  3 +++
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 94d0297..be43e22 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -266,22 +266,33 @@ static void exynos5_sromc_config(int flags)
 
 static void exynos5_i2c_config(int peripheral, int flags)
 {
+	int func01, func23;
+
+	 /* High-Speed I2C */
+	if (flags & PINMUX_FLAG_HS_MODE) {
+		func01 = 4;
+		func23 = 4;
+	} else {
+		func01 = 2;
+		func23 = 3;
+	}
+
 	switch (peripheral) {
 	case PERIPH_ID_I2C0:
-		gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2));
-		gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(func01));
+		gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(func01));
 		break;
 	case PERIPH_ID_I2C1:
-		gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2));
-		gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(func01));
+		gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(func01));
 		break;
 	case PERIPH_ID_I2C2:
-		gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(func23));
+		gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(func23));
 		break;
 	case PERIPH_ID_I2C3:
-		gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(func23));
+		gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(func23));
 		break;
 	case PERIPH_ID_I2C4:
 		gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h
index 0b91ef6..d0ae757 100644
--- a/arch/arm/include/asm/arch-exynos/pinmux.h
+++ b/arch/arm/include/asm/arch-exynos/pinmux.h
@@ -23,6 +23,9 @@ enum {
 	/* Flags for SROM controller */
 	PINMUX_FLAG_BANK	= 3 << 0,       /* bank number (0-3) */
 	PINMUX_FLAG_16BIT	= 1 << 2,       /* 16-bit width */
+
+	/* Flags for I2C */
+	PINMUX_FLAG_HS_MODE	= 1 << 1,       /* I2C High Speed Mode */
 };
 
 /**
-- 
1.9.1