[U-Boot] [U-Boot, v2] spl: Change debug to printf for "Unsupported boot-device"

[Michal Simek]

Hi guys,

2014-11-24 23:10 GMT+01:00 Tom Rini <trini at ti.com>:

> On Tue, Nov 11, 2014 at 07:03:55PM +0100, Stefan Roese wrote:
>
> > We had the problem on an AM33xx platform, that SPL detected an
> > unsupported boot-device. But since this message is a debug message
> > it took a bit of time to really know, where the hangup in SPL
> > resulted from. So let's change this debug message to a printf
> > and also print the detected boot-device that is not supported.
> > This makes debugging of such cases much easier.
> >
> > Signed-off-by: Stefan Roese <sr at denx.de>
> > Cc: Wolfgang Denk <wd at denx.de>
> > Cc: Tom Rini <trini at ti.com>
> > Acked-by: Heiko Schocher <hs at denx.de>
>
> Applied to u-boot/master, thanks!
>
>
This patch is causing problem on Microblaze because SPL exceed 4k limit.
It is only one printf which is called in entire SPL that's why this should
be solved a little bit differently.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform