[U-Boot] [PATCH v2 07/22] x86: Add an option to enabling building a ROM file

[Simon Glass]

Rather than requiring the Makefile to be modified, provide a build option to
enable the ROM to be built.

We cannot do this by default since it requires binary blobs. Without these
the build will fail.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2:
- Fix README typos

 Makefile       |  5 +++--
 doc/README.x86 | 10 ++++++----
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/Makefile b/Makefile
index a876f1f..c6e4ad1 100644
--- a/Makefile
+++ b/Makefile
@@ -729,8 +729,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 endif
 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 
-# We can't do this yet due to the need for binary blobs
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ifneq ($(BUILD_ROM),)
+ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
diff --git a/doc/README.x86 b/doc/README.x86
index 7df8cc5..ddfd75e 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -51,9 +51,11 @@ Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
 little bit tricky, as generally it requires several binary blobs which are not
 shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
 not turned on by default in the U-Boot source tree. Firstly, you need turn it
-on by uncommenting the following line in the main U-Boot Makefile:
+on by enabling the ROM build:
 
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+$ export BUILD_ROM=y
+
+This tells the Makefile to build u-boot.rom as a target.
 
 Link-specific instructions:
 
@@ -126,11 +128,11 @@ Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE and 0x1110015 matches the
 symbol address of _start (in arch/x86/cpu/start.S).
 
 If you want to use ELF as the coreboot payload, change U-Boot configuration to
-use CONFIG_OF_EMBED.
+use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE.
 
 CPU Microcode
 -------------
-Modern CPU usually requires a special bit stream called microcode [5] to be
+Modern CPUs usually require a special bit stream called microcode [5] to be
 loaded on the processor after power up in order to function properly. U-Boot
 has already integrated these as hex dumps in the source tree.
 
-- 
2.2.0.rc0.207.ga3a616c