[U-Boot] [RFC PATCH v2 6/6] x86: Enable the Intel quark/galileo build

[Bin Meng]

Make the Intel quark/galileo support avaiable in Kconfig and Makefile.
With this patch, we can generate u-boot.rom for Intel galileo board.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>

---

Changes in v2:
- Use Arduino-certified

 arch/x86/Kconfig      | 17 +++++++++++++++++
 arch/x86/cpu/Makefile |  1 +
 2 files changed, 18 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index defdce7..85dda2e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -52,6 +52,19 @@ config TARGET_MINNOWMAX
 	  Note that PCIE_ECAM_BASE is set up by the FSP so the value used
 	  by U-Boot matches that value.
 
+config TARGET_GALILEO
+	bool "Support Intel Galileo"
+	help
+	  This is the Intel Galileo board, which is the first in a family of
+	  Arduino-certified development and prototyping boards based on Intel
+	  architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
+	  single-core, single-thread, Intel Pentium processor instrunction set
+	  architecture (ISA) compatible, operating at speeds up to 400Mhz,
+	  along with 256MB DDR3 memory. It supports a wide range of industry
+	  standard I/O interfaces, including a full-sized mini-PCIe slot,
+	  one 100Mb Ethernet port, a microSD card slot, a USB host port and
+	  a USB client port.
+
 endchoice
 
 config RAMBASE
@@ -399,6 +412,8 @@ source "arch/x86/cpu/coreboot/Kconfig"
 
 source "arch/x86/cpu/ivybridge/Kconfig"
 
+source "arch/x86/cpu/quark/Kconfig"
+
 source "arch/x86/cpu/queensbay/Kconfig"
 
 source "board/coreboot/coreboot/Kconfig"
@@ -409,6 +424,8 @@ source "board/intel/crownbay/Kconfig"
 
 source "board/intel/minnowmax/Kconfig"
 
+source "board/intel/galileo/Kconfig"
+
 config PCIE_ECAM_BASE
 	hex
     default 0xe0000000
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 5acf8bb..6ded0a7 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_INTEL_BAYTRAIL) += baytrail/
 obj-$(CONFIG_SYS_COREBOOT) += coreboot/
 obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
 obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
+obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-y += lapic.o
 obj-y += mtrr.o
-- 
1.8.2.1