[U-Boot] [PATCH 01/13] lcd: move platform specific structs to their own headers
Nikita Kiryanov
nikita at compulab.co.il
Thu Jan 29 12:21:33 CET 2015
common/lcd code is full of platform specific code and definitions, which
ideally should reside with the respective driver code. Take a step towards that
goal by moving platform specific structs from lcd.h to their own header files.
The structs for the generic case (the #else for all the platform specific
cases) is retained in lcd.h as the default case.
Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
Cc: Bo Shen <voice.shen at atmel.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Anatolij Gustschin <agust at denx.de>
---
include/atmel_lcd.h | 38 ++++++++++
include/exynos_lcd.h | 81 +++++++++++++++++++++
include/lcd.h | 201 ++-------------------------------------------------
include/mpc823_lcd.h | 43 +++++++++++
include/pxa_lcd.h | 80 ++++++++++++++++++++
5 files changed, 247 insertions(+), 196 deletions(-)
create mode 100644 include/atmel_lcd.h
create mode 100644 include/exynos_lcd.h
create mode 100644 include/mpc823_lcd.h
create mode 100644 include/pxa_lcd.h
diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h
new file mode 100644
index 0000000..fa8aa29
--- /dev/null
+++ b/include/atmel_lcd.h
@@ -0,0 +1,38 @@
+/*
+ * atmel_lcd.h - Atmel LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ATMEL_LCD_H_
+#define _ATMEL_LCD_H_
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+ u_long vl_cont_pol_low; /* contrast polarity is low */
+ u_long vl_clk_pol; /* clock polarity */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+#endif
diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h
new file mode 100644
index 0000000..cf389da
--- /dev/null
+++ b/include/exynos_lcd.h
@@ -0,0 +1,81 @@
+/*
+ * exynos_lcd.h - Exynos LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _EXYNOS_LCD_H_
+#define _EXYNOS_LCD_H_
+
+enum {
+ FIMD_RGB_INTERFACE = 1,
+ FIMD_CPU_INTERFACE = 2,
+};
+
+enum exynos_fb_rgb_mode_t {
+ MODE_RGB_P = 0,
+ MODE_BGR_P = 1,
+ MODE_RGB_S = 2,
+ MODE_BGR_S = 3,
+};
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_freq; /* Frequency */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel */
+
+ /* Horizontal control register. Timing from data sheet */
+ u_char vl_hspw; /* Horz sync pulse width */
+ u_char vl_hfpd; /* Wait before of line */
+ u_char vl_hbpd; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vspw; /* Vertical sync pulse width */
+ u_char vl_vfpd; /* Wait before of frame */
+ u_char vl_vbpd; /* Wait end of frame */
+ u_char vl_cmd_allow_len; /* Wait end of frame */
+
+ unsigned int win_id;
+ unsigned int init_delay;
+ unsigned int power_on_delay;
+ unsigned int reset_delay;
+ unsigned int interface_mode;
+ unsigned int mipi_enabled;
+ unsigned int dp_enabled;
+ unsigned int cs_setup;
+ unsigned int wr_setup;
+ unsigned int wr_act;
+ unsigned int wr_hold;
+ unsigned int logo_on;
+ unsigned int logo_width;
+ unsigned int logo_height;
+ int logo_x_offset;
+ int logo_y_offset;
+ unsigned long logo_addr;
+ unsigned int rgb_mode;
+ unsigned int resolution;
+
+ /* parent clock name(MPLL, EPLL or VPLL) */
+ unsigned int pclk_name;
+ /* ratio value for source clock from parent clock. */
+ unsigned int sclk_div;
+
+ unsigned int dual_lcd_enabled;
+} vidinfo_t;
+
+void init_panel_info(vidinfo_t *vid);
+
+#endif
diff --git a/include/lcd.h b/include/lcd.h
index 160f940..fbba6a2 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -41,205 +41,15 @@ int bmp_display(ulong addr, int x, int y);
void lcd_set_flush_dcache(int flush);
#if defined CONFIG_MPC823
-/*
- * LCD controller stucture for MPC823 CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_wbl; /* Wait between lines */
-
- /* Vertical control register */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_lcdac; /* LCD AC timing */
- u_char vl_wbf; /* Wait between frames */
-} vidinfo_t;
-
+#include <mpc823_lcd.h>
#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
defined CONFIG_CPU_MONAHANS
-/*
- * PXA LCD DMA descriptor
- */
-struct pxafb_dma_descriptor {
- u_long fdadr; /* Frame descriptor address register */
- u_long fsadr; /* Frame source address register */
- u_long fidr; /* Frame ID register */
- u_long ldcmd; /* Command register */
-};
-
-/*
- * PXA LCD info
- */
-struct pxafb_info {
-
- /* Misc registers */
- u_long reg_lccr3;
- u_long reg_lccr2;
- u_long reg_lccr1;
- u_long reg_lccr0;
- u_long fdadr0;
- u_long fdadr1;
-
- /* DMA descriptors */
- struct pxafb_dma_descriptor * dmadesc_fblow;
- struct pxafb_dma_descriptor * dmadesc_fbhigh;
- struct pxafb_dma_descriptor * dmadesc_palette;
-
- u_long screen; /* physical address of frame buffer */
- u_long palette; /* physical address of palette memory */
- u_int palette_size;
-};
-
-/*
- * LCD controller stucture for PXA CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_hpw; /* Horz sync pulse width */
- u_char vl_blw; /* Wait before of line */
- u_char vl_elw; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_bfw; /* Wait before of frame */
- u_char vl_efw; /* Wait end of frame */
-
- /* PXA LCD controller params */
- struct pxafb_info pxa;
-} vidinfo_t;
-
+#include <pxa_lcd.h>
#elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- u_long vl_clk; /* pixel clock in ps */
-
- /* LCD configuration register */
- u_long vl_sync; /* Horizontal / vertical sync */
- u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_long vl_tft; /* 0 = passive, 1 = TFT */
- u_long vl_cont_pol_low; /* contrast polarity is low */
- u_long vl_clk_pol; /* clock polarity */
-
- /* Horizontal control register. */
- u_long vl_hsync_len; /* Length of horizontal sync */
- u_long vl_left_margin; /* Time from sync to picture */
- u_long vl_right_margin; /* Time from picture to sync */
-
- /* Vertical control register. */
- u_long vl_vsync_len; /* Length of vertical sync */
- u_long vl_upper_margin; /* Time from sync to picture */
- u_long vl_lower_margin; /* Time from picture to sync */
-
- u_long mmio; /* Memory mapped registers */
-} vidinfo_t;
-
+#include <atmel_lcd.h>
#elif defined(CONFIG_EXYNOS_FB)
-
-enum {
- FIMD_RGB_INTERFACE = 1,
- FIMD_CPU_INTERFACE = 2,
-};
-
-enum exynos_fb_rgb_mode_t {
- MODE_RGB_P = 0,
- MODE_BGR_P = 1,
- MODE_RGB_S = 2,
- MODE_BGR_S = 3,
-};
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_freq; /* Frequency */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel */
-
- /* Horizontal control register. Timing from data sheet */
- u_char vl_hspw; /* Horz sync pulse width */
- u_char vl_hfpd; /* Wait before of line */
- u_char vl_hbpd; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vspw; /* Vertical sync pulse width */
- u_char vl_vfpd; /* Wait before of frame */
- u_char vl_vbpd; /* Wait end of frame */
- u_char vl_cmd_allow_len; /* Wait end of frame */
-
- unsigned int win_id;
- unsigned int init_delay;
- unsigned int power_on_delay;
- unsigned int reset_delay;
- unsigned int interface_mode;
- unsigned int mipi_enabled;
- unsigned int dp_enabled;
- unsigned int cs_setup;
- unsigned int wr_setup;
- unsigned int wr_act;
- unsigned int wr_hold;
- unsigned int logo_on;
- unsigned int logo_width;
- unsigned int logo_height;
- int logo_x_offset;
- int logo_y_offset;
- unsigned long logo_addr;
- unsigned int rgb_mode;
- unsigned int resolution;
-
- /* parent clock name(MPLL, EPLL or VPLL) */
- unsigned int pclk_name;
- /* ratio value for source clock from parent clock. */
- unsigned int sclk_div;
-
- unsigned int dual_lcd_enabled;
-} vidinfo_t;
-
-void init_panel_info(vidinfo_t *vid);
-
+#include <exynos_lcd.h>
#else
-
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 160) */
ushort vl_row; /* Number of rows (i.e. 100) */
@@ -250,8 +60,7 @@ typedef struct vidinfo {
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
+#endif
extern vidinfo_t panel_info;
diff --git a/include/mpc823_lcd.h b/include/mpc823_lcd.h
new file mode 100644
index 0000000..7e210e3
--- /dev/null
+++ b/include/mpc823_lcd.h
@@ -0,0 +1,43 @@
+/*
+ * mpc823_lcd.h - MPC823 LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _MPC823_LCD_H_
+#define _MPC823_LCD_H_
+
+/*
+ * LCD controller stucture for MPC823 CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_wbl; /* Wait between lines */
+
+ /* Vertical control register */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_lcdac; /* LCD AC timing */
+ u_char vl_wbf; /* Wait between frames */
+} vidinfo_t;
+
+#endif
diff --git a/include/pxa_lcd.h b/include/pxa_lcd.h
new file mode 100644
index 0000000..723f6ab
--- /dev/null
+++ b/include/pxa_lcd.h
@@ -0,0 +1,80 @@
+/*
+ * pxa_lcd.h - PXA LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PXA_LCD_H_
+#define _PXA_LCD_H_
+
+/*
+ * PXA LCD DMA descriptor
+ */
+struct pxafb_dma_descriptor {
+ u_long fdadr; /* Frame descriptor address register */
+ u_long fsadr; /* Frame source address register */
+ u_long fidr; /* Frame ID register */
+ u_long ldcmd; /* Command register */
+};
+
+/*
+ * PXA LCD info
+ */
+struct pxafb_info {
+ /* Misc registers */
+ u_long reg_lccr3;
+ u_long reg_lccr2;
+ u_long reg_lccr1;
+ u_long reg_lccr0;
+ u_long fdadr0;
+ u_long fdadr1;
+
+ /* DMA descriptors */
+ struct pxafb_dma_descriptor *dmadesc_fblow;
+ struct pxafb_dma_descriptor *dmadesc_fbhigh;
+ struct pxafb_dma_descriptor *dmadesc_palette;
+
+ u_long screen; /* physical address of frame buffer */
+ u_long palette; /* physical address of palette memory */
+ u_int palette_size;
+};
+
+/*
+ * LCD controller stucture for PXA CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt;/* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_hpw; /* Horz sync pulse width */
+ u_char vl_blw; /* Wait before of line */
+ u_char vl_elw; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_bfw; /* Wait before of frame */
+ u_char vl_efw; /* Wait end of frame */
+
+ /* PXA LCD controller params */
+ struct pxafb_info pxa;
+} vidinfo_t;
+
+#endif
--
1.9.1
More information about the U-Boot
mailing list