[U-Boot] [RESEND PATCH 1/1] armv8: Add framework for CCN-504 interconnect configuration
Bhupesh Sharma
bhupesh.sharma at freescale.com
Wed Jul 1 06:28:03 CEST 2015
This patch adds a minimal framework for Dickens CCN-504
interconnect configuration - mainly related to adding Clusters/cores
to snoop/DVM domain and setting QoS of the RN-I ports.
LS2085A platform makes use of these configurations to support
better network data performance and to boot a SMP Linux.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
---
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 72 +++++++++++++++++++++++---
arch/arm/include/asm/arch-fsl-lsch3/config.h | 11 ++++
arch/arm/lib/Makefile | 1 +
arch/arm/lib/ccn504.S | 61 ++++++++++++++++++++++
4 files changed, 138 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/lib/ccn504.S
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
index 018c617..6b19d36 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
@@ -16,13 +16,71 @@ ENTRY(lowlevel_init)
mov x29, lr /* Save LR */
/* Add fully-coherent masters to DVM domain */
- ldr x1, =CCI_MN_BASE
- ldr x2, [x1, #CCI_MN_RNF_NODEID_LIST]
- str x2, [x1, #CCI_MN_DVM_DOMAIN_CTL_SET]
-1: ldr x3, [x1, #CCI_MN_DVM_DOMAIN_CTL_SET]
- mvn x0, x3
- tst x0, x3 /* Wait for domain addition to complete */
- b.ne 1b
+ ldr x0, =CCI_MN_BASE
+ ldr x1, =CCI_MN_RNF_NODEID_LIST
+ ldr x2, =CCI_MN_DVM_DOMAIN_CTL_SET
+ bl ccn504_add_masters_to_dvm
+
+ /* Set all RN-I ports to QoS of 15 */
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(0)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(0)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(0)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(2)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(2)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(2)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(6)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(6)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(6)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(12)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(12)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(12)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(16)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(16)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(16)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+
+ ldr x0, =CCI_S0_QOS_CONTROL_BASE(20)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S1_QOS_CONTROL_BASE(20)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
+ ldr x0, =CCI_S2_QOS_CONTROL_BASE(20)
+ ldr x1, =0x00FF000C
+ bl ccn504_set_qos
/* Set the SMMU page size in the sACR register */
ldr x1, =SMMU_BASE
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h
index ca8d38c..c47950c 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/config.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h
@@ -132,6 +132,17 @@
#define CCI_MN_DVM_DOMAIN_CTL 0x200
#define CCI_MN_DVM_DOMAIN_CTL_SET 0x210
+#define CCI_RN_I_0_BASE (CCI_MN_BASE + 0x800000)
+#define CCI_RN_I_2_BASE (CCI_MN_BASE + 0x820000)
+#define CCI_RN_I_6_BASE (CCI_MN_BASE + 0x860000)
+#define CCI_RN_I_12_BASE (CCI_MN_BASE + 0x8C0000)
+#define CCI_RN_I_16_BASE (CCI_MN_BASE + 0x900000)
+#define CCI_RN_I_20_BASE (CCI_MN_BASE + 0x940000)
+
+#define CCI_S0_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x10)
+#define CCI_S1_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x110)
+#define CCI_S2_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x210)
+
/* Device Configuration */
#define DCFG_BASE 0x01e00000
#define DCFG_PORSR1 0x000
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 31a5c8d..51497cc 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -42,6 +42,7 @@ obj-y += stack.o
ifdef CONFIG_CPU_V7M
obj-y += interrupts_m.o
else ifdef CONFIG_ARM64
+obj-y += ccn504.o
obj-y += gic_64.o
obj-y += interrupts_64.o
else
diff --git a/arch/arm/lib/ccn504.S b/arch/arm/lib/ccn504.S
new file mode 100644
index 0000000..7570c7b
--- /dev/null
+++ b/arch/arm/lib/ccn504.S
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Extracted from gic_64.S
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*************************************************************************
+ *
+ * void ccn504_add_masters_to_dvm(CCI_MN_BASE, CCI_MN_RNF_NODEID_LIST,
+ * CCI_MN_DVM_DOMAIN_CTL_SET);
+ *
+ * Add fully-coherent masters to DVM domain
+ *
+ *************************************************************************/
+ENTRY(ccn504_add_masters_to_dvm)
+ /*
+ * x0: CCI_MN_BASE
+ * x1: CCI_MN_RNF_NODEID_LIST
+ * x2: CCI_MN_DVM_DOMAIN_CTL_SET
+ */
+
+ /* Add fully-coherent masters to DVM domain */
+ ldr x9, [x0, x1]
+ str x9, [x0, x2]
+1: ldr x10, [x0, x2]
+ mvn x11, x10
+ tst x11, x10 /* Wait for domain addition to complete */
+ b.ne 1b
+
+ ret
+ENDPROC(ccn504_add_masters_to_dvm)
+
+/*************************************************************************
+ *
+ * void ccn504_set_qos(CCI_Sx_QOS_CONTROL_BASE, QoS Value);
+ *
+ * Initialize QoS settings for AR/AW override.
+ * Right now, this function sets the same QoS value for all RN-I ports
+ *
+ *************************************************************************/
+ENTRY(ccn504_set_qos)
+ /*
+ * x0: CCI_Sx_QOS_CONTROL_BASE
+ * x1: QoS Value
+ */
+
+ /* Set all RN-I ports to QoS value denoted by x1 */
+ ldr x9, [x0]
+ mov x10, x1
+ orr x9, x9, x10
+ str x9, [x0]
+
+ ret
+ENDPROC(ccn504_set_qos)
+
--
1.7.9.5
More information about the U-Boot
mailing list