[U-Boot] [PATCH v2 5/8] JFFS2: Optimize building lists during scan
Mark Tomlinson
mark.tomlinson at alliedtelesis.co.nz
Wed Jul 1 06:38:26 CEST 2015
If the flash is slow, reading less from the flash into buffers makes
the process faster.
Signed-off-by: Mark Tomlinson <mark.tomlinson at alliedtelesis.co.nz>
---
Changes in v2:
- Change comment style
fs/jffs2/jffs2_1pass.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index e58e7d2..f488537 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -1501,7 +1501,7 @@ jffs2_1pass_build_lists(struct part_info * part)
u32 counterF = 0;
u32 counterN = 0;
u32 max_totlen = 0;
- u32 buf_size = DEFAULT_EMPTY_SCAN_SIZE;
+ u32 buf_size;
char *buf;
nr_sectors = lldiv(part->size, part->sector_size);
@@ -1513,7 +1513,7 @@ jffs2_1pass_build_lists(struct part_info * part)
/* if we are building a list we need to refresh the cache. */
jffs_init_1pass_list(part);
pL = (struct b_lists *)part->jffs2_priv;
- buf = malloc(buf_size);
+ buf = malloc(DEFAULT_EMPTY_SCAN_SIZE);
puts ("Scanning JFFS2 FS: ");
/* start at the beginning of the partition */
@@ -1529,6 +1529,8 @@ jffs2_1pass_build_lists(struct part_info * part)
int ret;
#endif
+ /* Set buf_size to maximum length */
+ buf_size = DEFAULT_EMPTY_SCAN_SIZE;
WATCHDOG_RESET();
#ifdef CONFIG_JFFS2_SUMMARY
@@ -1603,6 +1605,11 @@ jffs2_1pass_build_lists(struct part_info * part)
ofs += sector_ofs;
prevofs = ofs - 1;
+ /*
+ * Set buf_size down to the minimum size required.
+ * This prevents reading in chunks of flash data unnecessarily.
+ */
+ buf_size = sizeof(union jffs2_node_union);
scan_more:
while (ofs < sector_ofs + part->sector_size) {
@@ -1683,13 +1690,18 @@ jffs2_1pass_build_lists(struct part_info * part)
case JFFS2_NODETYPE_INODE:
if (buf_ofs + buf_len < ofs + sizeof(struct
jffs2_raw_inode)) {
+ buf_len = min_t(uint32_t,
+ sizeof(struct jffs2_raw_inode),
+ sector_ofs +
+ part->sector_size -
+ ofs);
get_fl_mem((u32)part->offset + ofs,
buf_len, buf);
buf_ofs = ofs;
node = (void *)buf;
}
- if (!inode_crc((struct jffs2_raw_inode *) node))
- break;
+ if (!inode_crc((struct jffs2_raw_inode *)node))
+ break;
if (insert_node(&pL->frag, (u32) part->offset +
ofs) == NULL) {
@@ -1706,6 +1718,11 @@ jffs2_1pass_build_lists(struct part_info * part)
((struct
jffs2_raw_dirent *)
node)->nsize) {
+ buf_len = min_t(uint32_t,
+ node->totlen,
+ sector_ofs +
+ part->sector_size -
+ ofs);
get_fl_mem((u32)part->offset + ofs,
buf_len, buf);
buf_ofs = ofs;
--
1.9.1
More information about the U-Boot
mailing list