[U-Boot] [PATCH v4 14/16] dm: spi: xilinx_spi: Convert to driver model

Jagan Teki jteki at openedev.com
Wed Jul 1 18:56:19 CEST 2015


On 29 June 2015 at 13:20, Jagan Teki <jteki at openedev.com> wrote:
> This converts the xilinx spi driver to use the driver model.
>
> Signed-off-by: Jagan Teki <jteki at openedev.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> Cc: Michal Simek <michal.simek at xilinx.com>
> ---
> Changes for v4:
> - Removed cs_info ops, as it need to proper testing to verify.
>
> Changes for v3:
> - Get the cs number from xfer using dm_spi_slave_platdata
>
> Changes for v2:
> - Rebase to master
>
>  drivers/spi/xilinx_spi.c | 200 ++++++++++++++++++++++++++---------------------
>  1 file changed, 112 insertions(+), 88 deletions(-)
>
> diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
> index 650e494..4b0b50f 100644
> --- a/drivers/spi/xilinx_spi.c
> +++ b/drivers/spi/xilinx_spi.c
> @@ -4,6 +4,7 @@
>   * Supports 8 bit SPI transfers only, with or w/o FIFO
>   *
>   * Based on bfin_spi.c, by way of altera_spi.c
> + * Copyright (c) 2015 Jagan Teki <jteki at openedev.com>
>   * Copyright (c) 2012 Stephan Linz <linz at li-pro.net>
>   * Copyright (c) 2010 Graeme Smecher <graeme.smecher at mail.mcgill.ca>
>   * Copyright (c) 2010 Thomas Chou <thomas at wytron.com.tw>
> @@ -14,6 +15,8 @@
>
>  #include <config.h>
>  #include <common.h>
> +#include <dm.h>
> +#include <errno.h>
>  #include <malloc.h>
>  #include <spi.h>
>
> @@ -79,7 +82,7 @@
>  #endif
>
>  /* xilinx spi register set */
> -struct xilinx_spi_reg {
> +struct xilinx_spi_regs {
>         u32 __space0__[7];
>         u32 dgier;      /* Device Global Interrupt Enable Register (DGIER) */
>         u32 ipisr;      /* IP Interrupt Status Register (IPISR) */
> @@ -97,113 +100,75 @@ struct xilinx_spi_reg {
>         u32 spirfor;    /* SPI Receive FIFO Occupancy Register (SPIRFOR) */
>  };
>
> -/* xilinx spi slave */
> -struct xilinx_spi_slave {
> -       struct spi_slave slave;
> -       struct xilinx_spi_reg *regs;
> +/* xilinx spi priv */
> +struct xilinx_spi_priv {
> +       struct xilinx_spi_regs *regs;
>         unsigned int freq;
>         unsigned int mode;
>  };
>
> -static inline struct xilinx_spi_slave *to_xilinx_spi_slave(
> -                       struct spi_slave *slave)
> -{
> -       return container_of(slave, struct xilinx_spi_slave, slave);
> -}
> -
>  static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST;
> -int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> +static int xilinx_spi_probe(struct udevice *bus)
>  {
> -       return bus < ARRAY_SIZE(xilinx_spi_base_list) && cs < 32;
> -}
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
>
> -void spi_cs_activate(struct spi_slave *slave)
> -{
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> +       priv->regs = (struct xilinx_spi_regs *)xilinx_spi_base_list[bus->seq];
>
> -       writel(SPISSR_ACT(slave->cs), &xilspi->regs->spissr);
> -}
> +       writel(SPISSR_RESET_VALUE, &regs->srr);
>
> -void spi_cs_deactivate(struct spi_slave *slave)
> -{
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> -
> -       writel(SPISSR_OFF, &xilspi->regs->spissr);
> -}
> -
> -void spi_init(void)
> -{
> -       /* do nothing */
> +       return 0;
>  }
>
> -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> -                                 unsigned int max_hz, unsigned int mode)
> +static void spi_cs_activate(struct udevice *dev, uint cs)
>  {
> -       struct xilinx_spi_slave *xilspi;
> +       struct udevice *bus = dev_get_parent(dev);
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
>
> -       if (!spi_cs_is_valid(bus, cs)) {
> -               printf("XILSPI error: unsupported bus %d / cs %d\n", bus, cs);
> -               return NULL;
> -       }
> -
> -       xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs);
> -       if (!xilspi) {
> -               printf("XILSPI error: malloc of SPI structure failed\n");
> -               return NULL;
> -       }
> -       xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus];
> -       xilspi->freq = max_hz;
> -       xilspi->mode = mode;
> -       debug("spi_setup_slave: bus:%i cs:%i base:%p mode:%x max_hz:%d\n",
> -             bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
> -
> -       writel(SPISSR_RESET_VALUE, &xilspi->regs->srr);
> -
> -       return &xilspi->slave;
> +       writel(SPISSR_ACT(cs), &regs->spissr);
>  }
>
> -void spi_free_slave(struct spi_slave *slave)
> +static void spi_cs_deactivate(struct udevice *dev)
>  {
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> +       struct udevice *bus = dev_get_parent(dev);
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
>
> -       free(xilspi);
> +       writel(SPISSR_OFF, &regs->spissr);
>  }
>
> -int spi_claim_bus(struct spi_slave *slave)
> +static int xilinx_spi_claim_bus(struct udevice *dev)
>  {
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> -       u32 spicr;
> -
> -       debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
> -       writel(SPISSR_OFF, &xilspi->regs->spissr);
> +       struct udevice *bus = dev_get_parent(dev);
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
>
> -       spicr = XILSPI_SPICR_DFLT_ON;
> -       if (xilspi->mode & SPI_LSB_FIRST)
> -               spicr |= SPICR_LSB_FIRST;
> -       if (xilspi->mode & SPI_CPHA)
> -               spicr |= SPICR_CPHA;
> -       if (xilspi->mode & SPI_CPOL)
> -               spicr |= SPICR_CPOL;
> -       if (xilspi->mode & SPI_LOOP)
> -               spicr |= SPICR_LOOP;
> +       writel(SPISSR_OFF, &regs->spissr);
> +       writel(XILSPI_SPICR_DFLT_ON, &regs->spicr);
>
> -       writel(spicr, &xilspi->regs->spicr);
>         return 0;
>  }
>
> -void spi_release_bus(struct spi_slave *slave)
> +static int xilinx_spi_release_bus(struct udevice *dev)
>  {
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> +       struct udevice *bus = dev_get_parent(dev);
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
>
> -       debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
> -       writel(SPISSR_OFF, &xilspi->regs->spissr);
> -       writel(XILSPI_SPICR_DFLT_OFF, &xilspi->regs->spicr);
> +       writel(SPISSR_OFF, &regs->spissr);
> +       writel(XILSPI_SPICR_DFLT_OFF, &regs->spicr);
> +
> +       return 0;
>  }
>
> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
> -            void *din, unsigned long flags)
> +static int xilinx_spi_xfer(struct udevice *dev, unsigned int bitlen,
> +                           const void *dout, void *din, unsigned long flags)
>  {
> -       struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave);
> +       struct udevice *bus = dev_get_parent(dev);
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
> +       struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
>         /* assume spi core configured to do 8 bit transfers */
>         unsigned int bytes = bitlen / XILSPI_MAX_XFER_BITS;
>         const unsigned char *txp = dout;
> @@ -212,7 +177,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>         unsigned global_timeout;
>
>         debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n",
> -             slave->bus, slave->cs, bitlen, bytes, flags);
> +             bus->seq, slave_plat->cs, bitlen, bytes, flags);
>
>         if (bitlen == 0)
>                 goto done;
> @@ -225,8 +190,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>         }
>
>         /* empty read buffer */
> -       while (rxecount && !(readl(&xilspi->regs->spisr) & SPISR_RX_EMPTY)) {
> -               readl(&xilspi->regs->spidrr);
> +       while (rxecount && !(readl(&regs->spisr) & SPISR_RX_EMPTY)) {
> +               readl(&regs->spidrr);
>                 rxecount--;
>         }
>
> @@ -236,11 +201,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>         }
>
>         if (flags & SPI_XFER_BEGIN)
> -               spi_cs_activate(slave);
> +               spi_cs_activate(dev, slave_plat->cs);
>
>         /* at least 1usec or greater, leftover 1 */
> -       global_timeout = xilspi->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 :
> -                       (XILSPI_MAX_XFER_BITS * 1000000 / xilspi->freq) + 1;
> +       global_timeout = priv->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 :
> +                       (XILSPI_MAX_XFER_BITS * 1000000 / priv->freq) + 1;
>
>         while (bytes--) {
>                 unsigned timeout = global_timeout;
> @@ -249,8 +214,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>                 debug("spi_xfer: tx:%x ", d);
>
>                 /* write out and wait for processing (receive data) */
> -               writel(d & SPIDTR_8BIT_MASK, &xilspi->regs->spidtr);
> -               while (timeout && readl(&xilspi->regs->spisr)
> +               writel(d & SPIDTR_8BIT_MASK, &regs->spidtr);
> +               while (timeout && readl(&regs->spisr)
>                                                 & SPISR_RX_EMPTY) {
>                         timeout--;
>                         udelay(1);
> @@ -262,7 +227,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>                 }
>
>                 /* read Rx element and push into data in buffer */
> -               d = readl(&xilspi->regs->spidrr) & SPIDRR_8BIT_MASK;
> +               d = readl(&regs->spidrr) & SPIDRR_8BIT_MASK;
>                 if (rxp)
>                         *rxp++ = d;
>                 debug("spi_xfer: rx:%x\n", d);
> @@ -270,7 +235,66 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
>
>   done:
>         if (flags & SPI_XFER_END)
> -               spi_cs_deactivate(slave);
> +               spi_cs_deactivate(dev);
>
>         return 0;
>  }
> +
> +static int xilinx_spi_set_speed(struct udevice *bus, uint speed)
> +{
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +
> +       priv->freq = speed;
> +
> +       debug("xilinx_spi_set_speed: regs=%p, mode=%d\n", priv->regs,
> +             priv->freq);
> +
> +       return 0;
> +}
> +
> +static int xilinx_spi_set_mode(struct udevice *bus, uint mode)
> +{
> +       struct xilinx_spi_priv *priv = dev_get_priv(bus);
> +       struct xilinx_spi_regs *regs = priv->regs;
> +       uint32_t spicr;
> +
> +       spicr = readl(&regs->spicr);
> +       if (priv->mode & SPI_LSB_FIRST)
> +               spicr |= SPICR_LSB_FIRST;
> +       if (priv->mode & SPI_CPHA)
> +               spicr |= SPICR_CPHA;
> +       if (priv->mode & SPI_CPOL)
> +               spicr |= SPICR_CPOL;
> +       if (priv->mode & SPI_LOOP)
> +               spicr |= SPICR_LOOP;
> +
> +       writel(spicr, &regs->spicr);
> +       priv->mode = mode;
> +
> +       debug("xilinx_spi_set_mode: regs=%p, mode=%d\n", priv->regs,
> +             priv->mode);
> +
> +       return 0;
> +}
> +
> +static const struct dm_spi_ops xilinx_spi_ops = {
> +       .claim_bus      = xilinx_spi_claim_bus,
> +       .release_bus    = xilinx_spi_release_bus,
> +       .xfer           = xilinx_spi_xfer,
> +       .set_speed      = xilinx_spi_set_speed,
> +       .set_mode       = xilinx_spi_set_mode,
> +};
> +
> +static const struct udevice_id xilinx_spi_ids[] = {
> +       { .compatible = "xlnx,xilinx-spi" },
> +       { }
> +};
> +
> +U_BOOT_DRIVER(xilinx_spi) = {
> +       .name   = "xilinx_spi",
> +       .id     = UCLASS_SPI,
> +       .of_match = xilinx_spi_ids,
> +       .ops    = &xilinx_spi_ops,
> +       .priv_auto_alloc_size = sizeof(struct xilinx_spi_priv),
> +       .probe  = xilinx_spi_probe,
> +};
> --
> 1.9.1
>

Applied to u-boot-spi/master

thanks!
-- 
Jagan | openedev.


More information about the U-Boot mailing list