[U-Boot] [PATCH] config: ti_omap5_common: Palmas power support in SPL

[Paul Kocialkowski]

Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that
need to e.g. enable MMC power at SPL stage.

This is especially important when booting from a peripheral (such as USB, UART),
where the bootrom will not enable power for the MMC device that will hold the
main U-Boot.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 include/configs/ti_armv7_common.h | 1 +
 include/configs/ti_omap5_common.h | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 0aea7d1..34756de 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -261,6 +261,7 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 4179a57..b33feb6 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -40,9 +40,7 @@
 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
 #endif
 
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_PALMAS_POWER
-#endif
 
 #include <asm/arch/cpu.h>
 #include <asm/arch/omap.h>
-- 
1.9.1