[U-Boot] [PATCH] arm: dcc: Add uart dcc support for armv8

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Jul 2 23:24:45 CEST 2015


Hello Michal,

On Fri, 29 May 2015 09:54:37 +0200, Michal Simek <michal.simek at xilinx.com> wrote:
> From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
> 
> Added UART DCC support for armv8
> 
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
> 
> Not sure if CONFIG_CPU_ARMV8 is the right symbol but we are following
> pattern above. Maybe CONFIG_ARM64?
> 
> ---
>  drivers/serial/arm_dcc.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c
> index e77773740fb0..df7eb05e8246 100644
> --- a/drivers/serial/arm_dcc.c
> +++ b/drivers/serial/arm_dcc.c
> @@ -61,6 +61,22 @@
>  #define status_dcc(x)	\
>  		__asm__ volatile ("mrc p14, 0, %0, c14, c0, 0\n" : "=r" (x))
>  
> +#elif defined(CONFIG_CPU_ARMV8)
> +/*
> + * ARMV8
> + */
> +#define DCC_RBIT	(1 << 30)
> +#define DCC_WBIT	(1 << 29)
> +
> +#define write_dcc(x)   \
> +		__asm__ volatile ("msr dbgdtrtx_el0, %0\n" : : "r" (x))
> +
> +#define read_dcc(x)    \
> +		__asm__ volatile ("mrs %0, dbgdtrrx_el0\n" : "=r" (x))
> +
> +#define status_dcc(x)  \
> +		__asm__ volatile ("mrs %0, mdccsr_el0\n" : "=r" (x))
> +
>  #else
>  #define DCC_RBIT	(1 << 0)
>  #define DCC_WBIT	(1 << 1)
> -- 
> 2.3.5
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list