[U-Boot] [PATCH 15/55] cros_ec: Support the LDO access method used by spring

Simon Glass sjg at chromium.org
Fri Jul 3 02:15:52 CEST 2015


Add a driver to support the special LDO access used by spring. This is a
custom method in the cros_ec protocol - it does not use an I2C
pass-through.

There are two implementation choices:

1. Write a special LDO driver which can talk across the EC. Duplicate all
the logic from TPS65090 for retrying when the LDO fails to come up.

2. Write a special I2C bus driver which pretends to be a TPS65090 and
transfers reads and writes using the LDO message.

Either is distasteful. The latter method is chosen since it results in less
code duplication and a fairly simple (30-line) implementation of the core
logic.

The crosec 'ldo' subcommand could be removed (since i2c md/mw will work
instead) but is retained as a convenience.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/i2c/Kconfig       | 13 ++++++++
 drivers/i2c/Makefile      |  1 +
 drivers/i2c/cros_ec_ldo.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/cros_ec.c    | 21 +++++++------
 include/cros_ec.h         |  4 +--
 5 files changed, 104 insertions(+), 12 deletions(-)
 create mode 100644 drivers/i2c/cros_ec_ldo.c

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e861b53..9a62ddd 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -29,6 +29,19 @@ config I2C_CROS_EC_TUNNEL
 	  I2C or LPC). Some Chromebooks use this when the hardware design
 	  does not allow direct access to the main PMIC from the AP.
 
+config I2C_CROS_EC_LDO
+	bool "Provide access to LDOs on the Chrome OS EC"
+	depends on CROS_EC
+	---help---
+	On many Chromebooks the main PMIC is inaccessible to the AP. This is
+	often dealt with by using an I2C pass-through interface provided by
+	the EC. On some unfortunate models (e.g. Spring) the pass-through
+	is not available, and an LDO message is available instead. This
+	option enables a driver which provides very basic access to those
+	regulators, via the EC. We implement this as an I2C bus	which
+	emulates just the TPS65090 messages we know about. This is done to
+	avoid duplicating the logic in the TPS65090 regulator driver for
+	enabling/disabling an LDO.
 
 config DM_I2C_GPIO
 	bool "Enable Driver Model for software emulated I2C bus driver"
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 7f01fce..9b45248 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DM_I2C) += i2c-uclass.o
 obj-$(CONFIG_DM_I2C_COMPAT) += i2c-uclass-compat.o
 obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o
 obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
+obj-$(CONFIG_I2C_CROS_EC_LDO) += cros_ec_ldo.o
 
 obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
 obj-$(CONFIG_I2C_MV) += mv_i2c.o
diff --git a/drivers/i2c/cros_ec_ldo.c b/drivers/i2c/cros_ec_ldo.c
new file mode 100644
index 0000000..b817c61
--- /dev/null
+++ b/drivers/i2c/cros_ec_ldo.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg at chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <cros_ec.h>
+#include <errno.h>
+#include <i2c.h>
+#include <power/tps65090.h>
+
+static int cros_ec_ldo_set_bus_speed(struct udevice *dev, unsigned int speed)
+{
+	return 0;
+}
+
+static int cros_ec_ldo_xfer(struct udevice *dev, struct i2c_msg *msg,
+			    int nmsgs)
+{
+	bool is_read = nmsgs > 1;
+	int fet_id, ret;
+
+	/*
+	 * Look for reads and writes of the LDO registers. In either case the
+	 * first message is a write with the register number as the first byte.
+	 */
+	if (!nmsgs || !msg->len || (msg->flags & I2C_M_RD)) {
+		debug("%s: Invalid message\n", __func__);
+		goto err;
+	}
+
+	fet_id = msg->buf[0] - REG_FET_BASE;
+	if (fet_id < 1 || fet_id > MAX_FET_NUM) {
+		debug("%s: Invalid FET %d\n", __func__, fet_id);
+		goto err;
+	}
+
+	if (is_read) {
+		uint8_t state;
+
+		ret = cros_ec_get_ldo(dev->parent, fet_id, &state);
+		if (!ret)
+			msg[1].buf[0] = state ?
+				FET_CTRL_ENFET | FET_CTRL_PGFET : 0;
+	} else {
+		bool on = msg->buf[1] & FET_CTRL_ENFET;
+
+		ret = cros_ec_set_ldo(dev->parent, fet_id, on);
+	}
+
+	return ret;
+
+err:
+	/* Indicate that the message is unimplemented */
+	return -ENOSYS;
+}
+
+static const struct dm_i2c_ops cros_ec_i2c_ops = {
+	.xfer		= cros_ec_ldo_xfer,
+	.set_bus_speed	= cros_ec_ldo_set_bus_speed,
+};
+
+static const struct udevice_id cros_ec_i2c_ids[] = {
+	{ .compatible = "google,cros-ec-ldo-tunnel" },
+	{ }
+};
+
+U_BOOT_DRIVER(cros_ec_ldo) = {
+	.name	= "cros_ec_ldo_tunnel",
+	.id	= UCLASS_I2C,
+	.of_match = cros_ec_i2c_ids,
+	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+	.ops	= &cros_ec_i2c_ops,
+};
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index ae52561..6027177 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -931,31 +931,32 @@ int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block)
 	return 0;
 }
 
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state)
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
 {
+	struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
 	struct ec_params_ldo_set params;
 
 	params.index = index;
 	params.state = state;
 
-	if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0,
-		       &params, sizeof(params),
-		       NULL, 0))
+	if (ec_command_inptr(cdev, EC_CMD_LDO_SET, 0, &params, sizeof(params),
+			     NULL, 0))
 		return -1;
 
 	return 0;
 }
 
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
 {
+	struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
 	struct ec_params_ldo_get params;
 	struct ec_response_ldo_get *resp;
 
 	params.index = index;
 
-	if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
-		       &params, sizeof(params),
-		       (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
+	if (ec_command_inptr(cdev, EC_CMD_LDO_GET, 0, &params, sizeof(params),
+			     (uint8_t **)&resp, sizeof(*resp)) !=
+			     sizeof(*resp))
 		return -1;
 
 	*state = resp->state;
@@ -1681,9 +1682,9 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			state = simple_strtoul(argv[3], &endp, 10);
 			if (*argv[3] == 0 || *endp != 0)
 				return CMD_RET_USAGE;
-			ret = cros_ec_set_ldo(dev, index, state);
+			ret = cros_ec_set_ldo(udev, index, state);
 		} else {
-			ret = cros_ec_get_ldo(dev, index, &state);
+			ret = cros_ec_get_ldo(udev, index, &state);
 			if (!ret) {
 				printf("LDO%d: %s\n", index,
 					state == EC_LDO_STATE_ON ?
diff --git a/include/cros_ec.h b/include/cros_ec.h
index 41951c3..0ad9d81 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -350,7 +350,7 @@ int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
  * @param state		new state of the LDO/FET : EC_LDO_STATE_ON|OFF
  * @return 0 if ok, -1 on error
  */
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state);
 
 /**
  * Read back a LDO / FET current state.
@@ -360,7 +360,7 @@ int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
  * @param state		current state of the LDO/FET : EC_LDO_STATE_ON|OFF
  * @return 0 if ok, -1 on error
  */
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state);
 
 /**
  * Get access to the error reported when cros_ec_board_init() was called
-- 
2.4.3.573.g4eafbef



More information about the U-Boot mailing list