[U-Boot] [PATCH 42/55] dts: exynos: snow: Add a new node for the NXP video bridge driver

[Simon Glass]

The driver supports driver model. Add a node for snow, which needs it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/dts/exynos5250-snow.dts | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 3591252..334a5af 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -206,6 +206,22 @@
 		};
 	};
 
+	i2c at 12CD0000 {
+		ptn3460: lvds-bridge at 20 {
+			compatible = "nxp,ptn3460";
+			reg = <0x20>;
+			sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+			edid-emulation = <5>;
+		};
+
+		soundcodec at 22 {
+			reg = <0x22>;
+			compatible = "maxim,max98095-codec";
+		};
+	};
+
 	spi at 12d30000 {
 		spi-max-frequency = <50000000>;
 		firmware_storage_spi: flash at 0 {
@@ -238,26 +254,6 @@
 		status = "disabled";
 	};
 
-	i2c at 12CD0000 {
-		soundcodec at 22 {
-			reg = <0x22>;
-			compatible = "maxim,max98095-codec";
-		};
-
-		ptn3460-bridge at 20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			/*
-			 * TODO(sjg at chromium.org): Use GPIOs here
-			 * powerdown-gpio = <&gpy2 5 0>;
-			 * reset-gpio = <&gpx1 5 0>;
-			 * edid-emulation = <5>;
-			 * pinctrl-names = "default";
-			 * pinctrl-0 = <&ptn3460_gpios>;
-			 */
-		};
-	};
-
 	i2c at 12C60000 {
 		max77686 at 09 {
 			reg = <0x9>;
-- 
2.4.3.573.g4eafbef