[U-Boot] [PATCH 0/5] dcache support for Raspberry Pi 1

[Alexander Stein]

This patchset enables dcache support for Raspberry Pi 1.
First the cache support code was made similar to existing arm1136 code.
The invalidate and flush functions were inprovoed to accept also non-cacheline
aligned addresses. This reduces the cacheline size knowledge from generic
code.
Then rpi mailbox code has now dcache flush for writing the mailbox request and
a dcache invalidation for receiving the mailbox answer.
Finally the CONFIG_SYS_DCACHE_OFF switch got removed from rpi config.

dcache supprt increases the MMC read performance on RPI 1 from 5,4 MiB/s to
12.3 MiB/s. It doesn't seem to have any affect on RPI 2 though. I just get
error messages about non-cacheline aligned address upon invalidation.
The performance stucks at 1.2 MiB/s.

This was tested by the following command:
> fatload mmc 0:1 ${kernel_addr_r} zImage

Alexander Stein (5):
  arm1176/cpu: Match cache_flush to arm1136
  arm1176/cpu: Add icache and dcache support
  arm1176/cpu: Align cache flushing addresses to cacheline size
  arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw
    mailbox
  arm/rpi: Enable dcache

 arch/arm/cpu/arm1176/cpu.c   | 114 +++++++++++++++++++++++++++++++++++++++++--
 arch/arm/mach-bcm283x/mbox.c |   6 +++
 include/configs/rpi-common.h |   1 -
 3 files changed, 116 insertions(+), 5 deletions(-)

-- 
2.4.5