[U-Boot] [PATCH 0/4] This series implements fastboot on the "bcm28155_ap" boards.

[Steve Rae]

The OTG hardware is a DWC2 controller and this series uses the
existing gadget driver ("s3c_udc_otg.c").


JD (Jiandong) Zheng and Steve Rae (2):
  usb: gadget: bcm_udc_otg files
  implement Fastboot via USB OTG on bcm28155_ap boards

Steve Rae (2):
  g_dnl: add missing declaration
  usb: s3c-otg: support 8-bit interface

 arch/arm/include/asm/arch-bcm281xx/sysmap.h |  7 ++++
 board/broadcom/bcm28155_ap/bcm28155_ap.c    | 40 +++++++++++++++++++++++
 drivers/usb/gadget/Makefile                 |  1 +
 drivers/usb/gadget/bcm_udc_otg.h            | 17 ++++++++++
 drivers/usb/gadget/bcm_udc_otg_phy.c        | 50 +++++++++++++++++++++++++++++
 drivers/usb/gadget/s3c_udc_otg.c            |  4 +++
 include/configs/bcm28155_ap.h               | 20 ++++++++++++
 include/g_dnl.h                             |  1 +
 8 files changed, 140 insertions(+)
 create mode 100644 drivers/usb/gadget/bcm_udc_otg.h
 create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c

-- 
1.8.5