[U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards

[Steve Rae]

From: "JD (Jiandong) Zheng" <jdzheng at broadcom.com>

Signed-off-by: Steve Rae <srae at broadcom.com>
---

 board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 ++++++++++++++++++++++++++++++++
 drivers/usb/gadget/Makefile              |  1 +
 include/configs/bcm28155_ap.h            | 20 ++++++++++++++++
 3 files changed, 61 insertions(+)

diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
index 940a1c2..20eb191 100644
--- a/board/broadcom/bcm28155_ap/bcm28155_ap.c
+++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
@@ -12,12 +12,20 @@
 #include <asm/kona-common/clk.h>
 #include <asm/arch/sysmap.h>
 
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <g_dnl.h>
+
 #define SECWATCHDOG_SDOGCR_OFFSET	0x00000000
 #define SECWATCHDOG_SDOGCR_EN_SHIFT	27
 #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT	26
 #define SECWATCHDOG_SDOGCR_CLKS_SHIFT	20
 #define SECWATCHDOG_SDOGCR_LD_SHIFT	0
 
+#ifndef CONFIG_USB_SERIALNO
+#define CONFIG_USB_SERIALNO "1234567890"
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis)
 	return ret;
 }
 #endif
+
+#ifdef CONFIG_USB_GADGET
+static struct s3c_plat_otg_data bcm_otg_data = {
+	.regs_otg	= HSOTG_BASE_ADDR
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	debug("%s: performing s3c_udc_probe\n", __func__);
+	return s3c_udc_probe(&bcm_otg_data);
+}
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+	debug("%s\n", __func__);
+	if (!getenv("serial#"))
+		g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
+	return 0;
+}
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	debug("%s\n", __func__);
+	return 1;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	debug("%s\n", __func__);
+	return 0;
+}
+#endif
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 70bb550..d370f1c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
 obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o
 obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o
 obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o
+obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
 endif
 ifdef CONFIG_USB_ETHER
 obj-y += ether.o
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 900dc42..e5fdc90 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -109,6 +109,7 @@
  * for example.
  */
 #define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
 
 /* version string, parser, etc */
 #define CONFIG_VERSION_VARIABLE
@@ -136,4 +137,23 @@
 
 #undef CONFIG_CMD_NFS
 
+/* Fastboot and USB OTG */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV	0
+#define CONFIG_SYS_CACHELINE_SIZE	64
+#define CONFIG_USB_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
+#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
+#define CONFIG_USB_GADGET_PHY_8_BIT
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USBID_ADDR		0x34052c46
+#define CONFIG_G_DNL_VENDOR_NUM		0x18d1	/* google */
+#define CONFIG_G_DNL_PRODUCT_NUM	0x0d02	/* nexus one */
+#define CONFIG_G_DNL_MANUFACTURER	"Broadcom Corporation"
+
 #endif /* __BCM28155_AP_H */
-- 
1.8.5