[U-Boot] [PATCH] usb: CONFIG_USB_FASTBOOT prefix replacement for consistency

PaulK paulk at collins.paulk.fr
Tue Jul 7 14:22:27 CEST 2015


From: Paul Kocialkowski <contact at paulk.fr>

FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND CONFIG_CMD_FASTBOOT, so it doesn't
make much sense to have a CONFIG_USB_FASTBOOT prefix for fastboot-specific options, especially
given that other config options for fastboot use the CONFIG_FASTBOOT prefix.

This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, for consistency.

Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
 README                          | 4 ++--
 doc/README.android-fastboot     | 4 ++--
 drivers/usb/gadget/f_fastboot.c | 8 ++++----
 include/configs/am335x_evm.h    | 4 ++--
 include/configs/bav335x.h       | 4 ++--
 include/configs/dra7xx_evm.h    | 4 ++--
 include/configs/nitrogen6x.h    | 4 ++--
 include/configs/omap3_beagle.h  | 4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/README b/README
index ab171f9..c871e7c 100644
--- a/README
+++ b/README
@@ -1730,12 +1730,12 @@ The following options need to be configured:
 		This enables support for booting images which use the Android
 		image format header.
 
-		CONFIG_USB_FASTBOOT_BUF_ADDR
+		CONFIG_FASTBOOT_BUF_ADDR
 		The fastboot protocol requires a large memory buffer for
 		downloads. Define this to the starting RAM address to use for
 		downloaded images.
 
-		CONFIG_USB_FASTBOOT_BUF_SIZE
+		CONFIG_FASTBOOT_BUF_SIZE
 		The fastboot protocol requires a large memory buffer for
 		downloads. This buffer should be as large as possible for a
 		platform. Define this to the size available RAM for fastboot.
diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot
index 92f2897..ce12bc5 100644
--- a/doc/README.android-fastboot
+++ b/doc/README.android-fastboot
@@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE.
 
 The fastboot protocol requires a large memory buffer for downloads. This
 buffer should be as large as possible for a platform. The location of the
-buffer and size are set with CONFIG_USB_FASTBOOT_BUF_ADDR and
-CONFIG_USB_FASTBOOT_BUF_SIZE.
+buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and
+CONFIG_FASTBOOT_BUF_SIZE.
 
 Fastboot partition aliases can also be defined for devices where GPT
 limitations prevent user-friendly partition names such as "boot", "system"
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 60c846d..ca01a01 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req)
 		!strcmp_l1("max-download-size", cmd)) {
 		char str_num[12];
 
-		sprintf(str_num, "0x%08x", CONFIG_USB_FASTBOOT_BUF_SIZE);
+		sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE);
 		strncat(response, str_num, chars_left);
 	} else if (!strcmp_l1("serialno", cmd)) {
 		s = getenv("serial#");
@@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
 	if (buffer_size < transfer_size)
 		transfer_size = buffer_size;
 
-	memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes,
+	memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes,
 	       buffer, transfer_size);
 
 	pre_dot_num = download_bytes / BYTES_PER_DOT;
@@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req)
 
 	if (0 == download_size) {
 		sprintf(response, "FAILdata invalid size");
-	} else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) {
+	} else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) {
 		download_size = 0;
 		sprintf(response, "FAILdata too large");
 	} else {
@@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req)
 
 	strcpy(response, "FAILno flash device defined");
 #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
-	fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR,
+	fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR,
 			   download_bytes, response);
 #endif
 	fastboot_tx_write_str(response);
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index abcdfda..633391b 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -301,8 +301,8 @@
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE	0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
 
 /* To support eMMC booting */
 #define CONFIG_STORAGE_EMMC
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index 31b75f2..fa32fa4 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE	0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
 
 /* To support eMMC booting */
 #define CONFIG_STORAGE_EMMC
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 9dd5577..334721e 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -92,8 +92,8 @@
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR    CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE    0x2F000000
+#define CONFIG_FASTBOOT_BUF_ADDR    CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE    0x2F000000
 #define CONFIG_FASTBOOT_FLASH
 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 #endif
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 47239b1..3bb2e8f 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -349,7 +349,7 @@
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 
 #endif	       /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 59c780e..804e307 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -75,8 +75,8 @@
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE	0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x07000000
 
 /* USB EHCI */
 #define CONFIG_CMD_USB
-- 
1.9.1



More information about the U-Boot mailing list