[U-Boot] [PATCH] keystone2: use appropriate HD field for destination port

Ivan Khoronzhuk ivan.khoronzhuk at linaro.org
Wed Jul 8 18:59:22 CEST 2015


Hi, Vitaly

I suppose it's better to decide in upper driver how to use swinfo field.
Like in drivers/net/keystone_net.c

The keystone navigator supposed to be used as a tool for communicating
between different IPs, and each of them decide how to use swinfo fields.
It's protocol specific information and should be known only for sending
parts. What if tomorrow will be decided to send some packet to PA?,
rewrite this function again?

It's not the place for such kind information.

This is the h/w specific static decision and no need to check this
for each sent packet. It be better to statically assign how to use this
field depending on h/w revision, using macro configs, for instance:

CONFIG_SOC_K2HK
CONFIG_KSNET_NETCP_V1_0
CONFIG_KSNET_NETCP_V1_5

On 08.07.15 18:45, Vitaly Andrianov wrote:
> K2L and L2E have different from K2HK EthSS version, which uses tag_info
> field for destination slave port. This commit adds the dest_port_info field
> to the struct pktdma_cfg, to configure which HD filed tag_info or pkt_info
> shall be used to configure descriptor.
>
> Before that commit the swinfo[2] was used for that purpose. Even if that
> worked on K2HK devices, the correct field for K2HK is the pkt_info.
>
> The netcp_send() configure appropriate HD info field depending on the
> direct_info of the currently using netcp.
>
> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
> Acked-by: Murali Karicheri <m-karicheri2 at ti.com>
> ---
>   arch/arm/include/asm/ti-common/keystone_nav.h |  9 ++++++++-
>   drivers/dma/keystone_nav.c                    | 12 ++++++++++--
>   drivers/net/keystone_net.c                    |  3 +--
>   3 files changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/include/asm/ti-common/keystone_nav.h b/arch/arm/include/asm/ti-common/keystone_nav.h
> index 696d8c6..5a0e391 100644
> --- a/arch/arm/include/asm/ti-common/keystone_nav.h
> +++ b/arch/arm/include/asm/ti-common/keystone_nav.h
> @@ -152,6 +152,11 @@ struct rx_flow_regs {
>   	u32	thresh[3];
>   };
>
> +enum dest_port_info {
> +	PKT_INFO,
> +	TAG_INFO
> +};
> +
>   struct pktdma_cfg {
>   	struct global_ctl_regs	*global;
>   	struct tx_chan_regs	*tx_ch;
> @@ -167,6 +172,7 @@ struct pktdma_cfg {
>   	u32			tx_snd_q;
>
>   	u32			rx_flow; /* flow that is used for RX */
> +	enum dest_port_info     dest_port_info;/* HD fiels for dest port bits */
>   };
>
>   extern struct pktdma_cfg netcp_pktdma;
> @@ -184,7 +190,8 @@ struct rx_buff_desc {
>
>   int ksnav_close(struct pktdma_cfg *pktdma);
>   int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers);
> -int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2);
> +int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes,
> +	       u32 dest_port);
>   void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes);
>   void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd);
>
> diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c
> index dfca75a..64b1cee 100644
> --- a/drivers/dma/keystone_nav.c
> +++ b/drivers/dma/keystone_nav.c
> @@ -278,7 +278,8 @@ int ksnav_close(struct pktdma_cfg *pktdma)
>   	return QM_OK;
>   }
>
> -int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2)
> +int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes,
> +	       u32 dest_port)
>   {
>   	struct qm_host_desc *hd;
>
> @@ -286,8 +287,15 @@ int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2)
>   	if (hd == NULL)
>   		return QM_ERR;
>
> +	dest_port &= 0xf;
>   	hd->desc_info	= num_bytes;
> -	hd->swinfo[2]	= swinfo2;
> +	if (pktdma->dest_port_info == PKT_INFO) {
> +		hd->packet_info	= qm_cfg->qpool_num | (dest_port << 16);
> +	} else {
> +		hd->packet_info = qm_cfg->qpool_num;
> +		hd->tag_info = dest_port;
> +	}
> +
>   	hd->packet_info = qm_cfg->qpool_num;
>
>   	qm_buff_push(hd, pktdma->tx_snd_q, pkt, num_bytes);
> diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
> index 0c5fdee..e2adb67 100644
> --- a/drivers/net/keystone_net.c
> +++ b/drivers/net/keystone_net.c
> @@ -381,8 +381,7 @@ int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
>   	if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
>   		num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
>
> -	return ksnav_send(&netcp_pktdma, buffer,
> -			  num_bytes, (slave_port_num) << 16);
> +	return ksnav_send(&netcp_pktdma, buffer, num_bytes, slave_port_num);
>   }
>
>   /* Eth device open */
>


More information about the U-Boot mailing list