[U-Boot] [PATCH V2 2/2] imx: mx6 add i2c4 clock support for i.MX6SX

[Stefano Babic]

On 01/07/2015 11:01, Peng Fan wrote:
> Add I2C4 clock support for i.MX6SX. Since we use runtime check,
> but not macro, we need to remove `#ifdef ..` in crm_regs.h, or
> gcc will fail to compile the code succesfully.
> 
> Making the macros only for i.MX6SX open to other i.MX6x maybe not
> a good choice, but we have runtime check.
> 
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> ---
> 
> Changes v2:
>  correct spelling error in commit log.
> 
>  arch/arm/cpu/armv7/mx6/clock.c           | 14 ++++++++++----
>  arch/arm/include/asm/arch-mx6/crm_regs.h |  5 ++---
>  2 files changed, 12 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index 7bd78d7..3e94472 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -126,6 +126,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
>  {
>  	u32 reg;
>  	u32 mask;
> +	u32 *addr;
>  
>  	if (i2c_num > 3)
>  		return -EINVAL;
> @@ -140,14 +141,19 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
>  			reg &= ~mask;
>  		__raw_writel(reg, &imx_ccm->CCGR2);
>  	} else {
> -		mask = MXC_CCM_CCGR_CG_MASK
> -			<< (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET);
> -		reg = __raw_readl(&imx_ccm->CCGR1);
> +		if (is_cpu_type(MXC_CPU_MX6SX)) {
> +			mask = MXC_CCM_CCGR6_I2C4_MASK;
> +			addr = &imx_ccm->CCGR6;
> +		} else {
> +			mask = MXC_CCM_CCGR1_I2C4_SERIAL_MASK;
> +			addr = &imx_ccm->CCGR1;
> +		}
> +		reg = __raw_readl(addr);
>  		if (enable)
>  			reg |= mask;
>  		else
>  			reg &= ~mask;
> -		__raw_writel(reg, &imx_ccm->CCGR1);
> +		__raw_writel(reg, addr);
>  	}
>  	return 0;
>  }
> diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
> index 5bbf6e0..7d9fe73 100644
> --- a/arch/arm/include/asm/arch-mx6/crm_regs.h
> +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
> @@ -742,7 +742,7 @@ struct mxc_ccm_reg {
>  #define MXC_CCM_CCGR6_USDHC4_MASK		(3 << MXC_CCM_CCGR6_USDHC4_OFFSET)
>  #define MXC_CCM_CCGR6_EMI_SLOW_OFFSET		10
>  #define MXC_CCM_CCGR6_EMI_SLOW_MASK		(3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET)
> -#ifdef CONFIG_MX6SX
> +/* The following *CCGR6* exist only i.MX6SX */
>  #define MXC_CCM_CCGR6_PWM8_OFFSET		16
>  #define MXC_CCM_CCGR6_PWM8_MASK			(3 << MXC_CCM_CCGR6_PWM8_OFFSET)
>  #define MXC_CCM_CCGR6_VADC_OFFSET		20
> @@ -757,10 +757,9 @@ struct mxc_ccm_reg {
>  #define MXC_CCM_CCGR6_PWM6_MASK			(3 << MXC_CCM_CCGR6_PWM6_OFFSET)
>  #define MXC_CCM_CCGR6_PWM7_OFFSET		30
>  #define MXC_CCM_CCGR6_PWM7_MASK			(3 << MXC_CCM_CCGR6_PWM7_OFFSET)
> -#else
> +/* The two does not exist on i.MX6SX */
>  #define MXC_CCM_CCGR6_VDOAXICLK_OFFSET		12
>  #define MXC_CCM_CCGR6_VDOAXICLK_MASK		(3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET)
> -#endif
>  
>  #define BM_ANADIG_PLL_SYS_LOCK 0x80000000
>  #define BP_ANADIG_PLL_SYS_RSVD0      20
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================