[U-Boot] [PATCH] musb: set MUSB speed based on CONFIG

[Hans de Goede]

Hi,

On 10-07-15 16:30, Hans de Goede wrote:
> Hi,
>
> On 10-07-15 15:16, Samuel Egli wrote:
>> From: Bin Liu <b-liu at ti.com>
>>
>> Do not config MUSB to highspeed mode if CONFIG_USB_GADGET_DUALSPEED
>> is not set, in which case Ether gadget only operates in fullspeed.
>>
>> Note:
>> This patch is necessary for devices like some siemens boards
>> that allow only FULL SPEED USB 1.1, e.g. DFU download.
>>
>> Signed-off-by: Bin Liu <b-liu at ti.com>
>> Reviewed-by: Tom Rini <trini at konsulko.com>
>> Tested-by: Samuel Egli <samuel.egli at siemens.com>
>> CC: Marek Vasut <marex at denx.de>
>> CC: Heiko Schocher <hs at denx.de>
>> CC: Daniel Mack <zonque at gmail.com>
>> CC: Roger Meier <r.meier at siemens.com>
>
> Nack this breaks highspeed mode on boards which use the musb
> in host mode, and thus do not set CONFIG_USB_GADGET_DUALSPEED.

p.s.

Given that you want to use this as a hack to work around the broken
pcb design of your board I suggest adding a new option for this
titled: CONFIG_USB_MUSB_NO_HIGHSPEED and then do:

+#ifndef CONFIG_USB_MUSB_NO_HIGHSPEED
                            | MUSB_POWER_HSENAB
+#endif

Using CONFIG_USB_GADGET_DUALSPEED for this seems wrong, since this
has nothing to do with enabling dualspeed mode for the gadget code
really.

Regards,

Hans


>
> Regards,
>
> Hans
>
>
>> ---
>>   drivers/usb/musb-new/musb_core.c |    2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c
>> index 242cc30..4edd6d7 100644
>> --- a/drivers/usb/musb-new/musb_core.c
>> +++ b/drivers/usb/musb-new/musb_core.c
>> @@ -942,7 +942,9 @@ void musb_start(struct musb *musb)
>>
>>       /* put into basic highspeed mode and start session */
>>       musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
>> +#ifdef CONFIG_USB_GADGET_DUALSPEED
>>                           | MUSB_POWER_HSENAB
>> +#endif
>>                           /* ENSUSPEND wedges tusb */
>>                           /* | MUSB_POWER_ENSUSPEND */
>>                           );
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot