[U-Boot] [PATCH 01/16] mx53loco: Use generic 'load' command instead of 'fatload'

[Otavio Salvador]

From: Guillaume GARDET <guillaume.gardet at free.fr>

This patch uses generic 'load' command instead of 'fatload' for 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board.

This allows to use EXT partition instead of FAT, while keeping FAT compatibility.

Signed-off-by: Guillaume GARDET <guillaume.gardet at free.fr>

Cc: Jason Liu <r64343 at freescale.com>
Cc: Stefano Babic <sbabic at denx.de>
Acked-by: Jason Liu <r64343 at freescale.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---

 include/configs/mx53loco.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index db551a9..b3ac5e2 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -43,6 +43,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
@@ -116,11 +117,11 @@
 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
 	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- 
2.4.5