[U-Boot] [PATCH V2 4/4] configs: ti_armv7_keystone2: start using armv7_common

[Nishanth Menon]

On 07/17/2015 11:04 AM, Murali Karicheri wrote:
> On 07/16/2015 03:08 PM, Nishanth Menon wrote:
>> Try to maintain as much commonality by conditionally including stuff
>> in armv7_common as necessary and removing the common defines from
>> keystone2 header.
>>
> Including the common ti_armv7_common.h for keystone also add duplication
> of the various addresses
> 
> #define DEFAULT_LINUX_BOOT_ENV \
>     "loadaddr=0x82000000\0" \
>     "kernel_addr_r=0x82000000\0" \
>     "fdtaddr=0x88000000\0" \
>     "fdt_addr_r=0x88000000\0" \
>     "rdaddr=0x88080000\0" \
>     "ramdisk_addr_r=0x88080000\0" \
>     "bootm_size=0x10000000\0"
> 
> Some of these are also defined in keystone common file. The env scripts
> for keystone to be reworked to use the common variable above.
> 
> Rework the CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS to include common as well.

we need to cleanup all the variables  once we get the distro config
included in anyways... I had decided not to rock the apple cart too much
with this patch -> just the basic consolidation with as minimal changes
as necessary. inclusion of DEFAULT_LINUX_BOOT_ENV into keystone2.h can
be done as a follow on patch.

> Did you do a test with env default -f -a with this to check if it
> continues to work for Keystone Linux boot.
> 

after the series: http://pastebin.ubuntu.com/11893531/
before the series: http://pastebin.ubuntu.com/11893576/
deltas:
bootdelay is 1 now
additional definitions:
arch=arm
soc=keystone    	
vendor=ti
cpu=armv7
board=ks2_evm
board_name=ks2_evm

will be great to get a tested by on that. Nothing else seems to have
changed.

>>
>> diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
>> index ac50a01b2980..f1e650141ae1 100644
>> --- a/include/configs/k2e_evm.h
>> +++ b/include/configs/k2e_evm.h
>> @@ -15,8 +15,6 @@
>>   #define CONFIG_K2E_EVM
>>
>>   /* U-Boot general configuration */
>> -#define CONFIG_SYS_PROMPT               "K2E EVM # "
> 
> Why remove this?

arm_v7_common defines just "u-boot#" for all SoC and boards. So, we dont
need this.

>>   #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                \
>>       "addr_mon=0x0c140000\0"                        \
>>       "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "    \
>> diff --git a/include/configs/ti_armv7_common.h
>> b/include/configs/ti_armv7_common.h
>> index 63244dbc83ff..814da3409c46 100644
>> --- a/include/configs/ti_armv7_common.h
>> +++ b/include/configs/ti_armv7_common.h
>> @@ -73,9 +73,13 @@
>>   #ifndef CONFIG_NR_DRAM_BANKS
>>   #define CONFIG_NR_DRAM_BANKS        1
>>   #endif
>> +
> Why these extra spaces?

Thanks.. will drop.

> I assume the one you have removed is already part of
> include/configs/ti_armv7_keystone2.h.

for i in `git grep "^#define" include/configs/ti_armv7_keystone2.h|sed
-e "s/\s\s*/ /g"|cut -d ' ' -f2|sort|uniq`; do k=`git grep $i
include/configs/ti_armv7_common.h`; if [ -n "$k" ]; then echo $i; fi; done

Then started cleaning them up.



-- 
Regards,
Nishanth Menon