[U-Boot] [PATCH 0/3] lpc32xx: add legacy NXP BSP drivers

[Marek Vasut]

On Friday, July 17, 2015 at 10:48:51 PM, slemieux.tyco at gmail.com wrote:
> From: Sylvain Lemieux <slemieux at tycoint.com>
> 
> This series of patches bring the legacy NXP LPC32xx BSP
> drivers (SLC NAND, DMA & USB) into the latest u-boot.
> 
> Refer to each individual patches for details on the change done to
> integrate the driver into the latest u-boot.
> 
> The legacy BSP patch (u-boot-2009.03_lpc32x0-v1.07.patch.tar.bz2)
> was downloaded from the LPCLinux Web site.
> 
> The patch adding the LPC32xx MAC and SMSC RMII phy support
> should be applied first:
> - http://patchwork.ozlabs.org/patch/489100/
> - http://patchwork.ozlabs.org/patch/489190/
> - http://patchwork.ozlabs.org/patch/491419/
> - http://patchwork.ozlabs.org/patch/491420/
> 
> The SLC NAND patch is conflicting with the following patch sent
> on the mailing list:
> - https://patchwork.ozlabs.org/patch/496017/
> 
> The ported implementation of the SLC NAND driver from the legacy
> NXP BSP support the hardware ECC.
> 
> Note:
> I am sending the patches using <slemieux.tyco at gmail.com>,
> until I can submit patch using my regular e-mail <slemieux at tycoint.com>.

Will there ever be LPC810 support in U-Boot ? :-)

Best regards,
Marek Vasut