[U-Boot] [PATCH 1/3] stm32f429: pass the device unique ID in DTB
Antonio Borneo
borneo.antonio at gmail.com
Sun Jul 19 16:19:46 CEST 2015
Read device unique ID and set environment variable "serial#".
Value would then be passed to kernel through DTB.
To read ID from DTB, kernel is required to have commit:
3f599875e5202986b350618a617527ab441bf206 (ARM: 8355/1: arch: Show
the serial number from devicetree in cpuinfo)
This commit is already mainline since v4.1-rc1.
Signed-off-by: Antonio Borneo <borneo.antonio at gmail.com>
To: Albert Aribaud <albert.u.boot at aribaud.net>
To: Tom Rini <trini at konsulko.com>
To: Kamil Lulko <rev13 at wp.pl>
Cc: u-boot at lists.denx.de
---
arch/arm/include/asm/arch-stm32f4/stm32.h | 10 ++++++++++
board/st/stm32f429-discovery/stm32f429-discovery.c | 19 +++++++++++++++++++
include/configs/stm32f429-discovery.h | 1 +
3 files changed, 30 insertions(+)
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h
index a9f88db..3ed3801 100644
--- a/arch/arm/include/asm/arch-stm32f4/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f4/stm32.h
@@ -14,6 +14,7 @@
/*
* Peripheral memory map
*/
+#define STM32_SYSMEM_BASE 0x1FFF0000
#define STM32_PERIPH_BASE 0x40000000
#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000)
#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000)
@@ -25,6 +26,12 @@
/*
* Register maps
*/
+struct stm32_u_id_regs {
+ u32 u_id_low;
+ u32 u_id_mid;
+ u32 u_id_high;
+};
+
struct stm32_rcc_regs {
u32 cr; /* RCC clock control */
u32 pllcfgr; /* RCC PLL configuration */
@@ -78,6 +85,9 @@ struct stm32_flash_regs {
/*
* Registers access macros
*/
+#define STM32_U_ID_BASE (STM32_SYSMEM_BASE + 0x7A10)
+#define STM32_U_ID ((struct stm32_u_id_regs *)STM32_U_ID_BASE)
+
#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800)
#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE)
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 2dd5d93..f418186 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -285,3 +285,22 @@ int board_init(void)
return 0;
}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ char serialno[25];
+ uint32_t u_id_low, u_id_mid, u_id_high;
+
+ if (!getenv("serial#")) {
+ u_id_low = readl(&STM32_U_ID->u_id_low);
+ u_id_mid = readl(&STM32_U_ID->u_id_mid);
+ u_id_high = readl(&STM32_U_ID->u_id_high);
+ sprintf(serialno, "%08x%08x%08x",
+ u_id_high, u_id_mid, u_id_low);
+ setenv("serial#", serialno);
+ }
+
+ return 0;
+}
+#endif
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index 1b4fd21..4cc7324 100644
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -15,6 +15,7 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_FLASH_BASE 0x08000000
--
2.4.6
More information about the U-Boot
mailing list