[U-Boot] [PATCH 01/11][v2] imx: imximage: add new CHECK/CLR BIT command
Stefano Babic
sbabic at denx.de
Mon Jul 20 09:33:16 CEST 2015
Hi Adrian, hi Peng,
On 16/07/2015 00:49, Adrian Alonso wrote:
> * Extend imximage DCD version 2 to support DCD commands
> CMD_WRITE_CLR_BIT 4 [address] [mask bit] means:
> while ((*address & ~mask) != 0);
> CMD_CHECK_BITS_SET 4 [address] [mask bit] means:
> while ((*address & mask) != mask);
> CMD_CHECK_BITS_CLR 4 [address] [mask bit] means:
> *address = *address & ~mask;
> * Add set_dcd_param_v2 helper function to set DCD
> command parameters
>
> Signed-off-by: Adrian Alonso <aalonso at freescale.com>
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> ---
> Changes for V2
> - Add set_dcd_param_v2 helper function to set DCD command tag
> and parameters
>
> tools/imximage.c | 99 ++++++++++++++++++++++++++++++++++++++++++++------------
> tools/imximage.h | 25 ++++++++++----
> 2 files changed, 97 insertions(+), 27 deletions(-)
>
> diff --git a/tools/imximage.c b/tools/imximage.c
> index 6f469ae..cc0392f 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -21,7 +21,10 @@
> static table_entry_t imximage_cmds[] = {
> {CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
> {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", },
> - {CMD_DATA, "DATA", "Reg Write Data", },
> + {CMD_WRITE_DATA, "DATA", "Reg Write Data", },
> + {CMD_WRITE_CLR_BIT, "CLR_BIT", "Reg clear bit", },
> + {CMD_CHECK_BITS_SET, "CHECK_BITS_SET", "Reg Check bits set", },
> + {CMD_CHECK_BITS_CLR, "CHECK_BITS_CLR", "Reg Check bits clr", },
> {CMD_CSF, "CSF", "Command Sequence File", },
> {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", },
> {-1, "", "", },
> @@ -62,7 +65,7 @@ static table_entry_t imximage_boot_loadsize[] = {
> */
> static table_entry_t imximage_versions[] = {
> {IMXIMAGE_V1, "", " (i.MX25/35/51 compatible)", },
> - {IMXIMAGE_V2, "", " (i.MX53/6 compatible)", },
> + {IMXIMAGE_V2, "", " (i.MX53/6/7 compatible)", },
> {-1, "", " (Invalid)", },
> };
>
> @@ -79,6 +82,7 @@ static uint32_t imximage_csf_size = UNDEFINED;
> static uint32_t imximage_init_loadsize;
>
> static set_dcd_val_t set_dcd_val;
> +static set_dcd_param_t set_dcd_param;
> static set_dcd_rst_t set_dcd_rst;
> static set_imx_hdr_t set_imx_hdr;
> static uint32_t max_dcd_entries;
> @@ -128,6 +132,12 @@ static void err_imximage_version(int version)
> exit(EXIT_FAILURE);
> }
>
> +static void set_dcd_param_v1(struct imx_header *imxhdr, uint32_t dcd_len,
> + int32_t cmd)
> +{
> + /* DCD V1 no parameter settings */
> +}
It is better you check if you drop this and you check if the pointer is
set to NULL before calling.
> +
> static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno,
> int fld, uint32_t value, uint32_t off)
> {
> @@ -156,6 +166,43 @@ static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno,
> }
> }
>
> +static void set_dcd_param_v2(struct imx_header *imxhdr, uint32_t dcd_len,
> + int32_t cmd)
> +{
> + dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
> +
> + switch (cmd) {
> + case CMD_WRITE_DATA:
> + dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> + dcd_v2->write_dcd_command.length = cpu_to_be16(
> + dcd_len * sizeof(dcd_addr_data_t) + 4);
> + dcd_v2->write_dcd_command.param = DCD_WRITE_DATA_PARAM;
> + break;
> + case CMD_WRITE_CLR_BIT:
> + dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> + dcd_v2->write_dcd_command.length = cpu_to_be16(
> + dcd_len * sizeof(dcd_addr_data_t) + 4);
> + dcd_v2->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM;
> + break;
> + case CMD_CHECK_BITS_SET:
> + dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> + /*
> + * Check data command only supports one entry,
> + * so use 0xC = size(address + value + command).
> + */
Comment applied to both CHECK_BITS, you could move it before (or put it
also in CMD_CHECK_BITS_CLR case).
> + dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
> + dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> + break;
> + case CMD_CHECK_BITS_CLR:
> + dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> + dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
> + dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> + break;
> + default:
> + break;
> + }
> +}
> +
> static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno,
> int fld, uint32_t value, uint32_t off)
> {
> @@ -200,10 +247,7 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
> dcd_v2->header.length = cpu_to_be16(
> dcd_len * sizeof(dcd_addr_data_t) + 8);
> dcd_v2->header.version = DCD_VERSION;
> - dcd_v2->write_dcd_command.tag = DCD_COMMAND_TAG;
> - dcd_v2->write_dcd_command.length = cpu_to_be16(
> - dcd_len * sizeof(dcd_addr_data_t) + 4);
> - dcd_v2->write_dcd_command.param = DCD_COMMAND_PARAM;
> + set_dcd_param_v2(imxhdr, dcd_len, CMD_WRITE_DATA);
> }
>
> static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
> @@ -266,12 +310,14 @@ static void set_hdr_func(void)
> switch (imximage_version) {
> case IMXIMAGE_V1:
> set_dcd_val = set_dcd_val_v1;
> + set_dcd_param = set_dcd_param_v1;
> set_dcd_rst = set_dcd_rst_v1;
> set_imx_hdr = set_imx_hdr_v1;
> max_dcd_entries = MAX_HW_CFG_SIZE_V1;
> break;
> case IMXIMAGE_V2:
> set_dcd_val = set_dcd_val_v2;
> + set_dcd_param = set_dcd_param_v2;
> set_dcd_rst = set_dcd_rst_v2;
> set_imx_hdr = set_imx_hdr_v2;
> max_dcd_entries = MAX_HW_CFG_SIZE_V2;
> @@ -396,8 +442,12 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token,
> if (unlikely(cmd_ver_first != 1))
> cmd_ver_first = 0;
> break;
> - case CMD_DATA:
> + case CMD_WRITE_DATA:
> + case CMD_WRITE_CLR_BIT:
> + case CMD_CHECK_BITS_SET:
> + case CMD_CHECK_BITS_CLR:
> value = get_cfg_value(token, name, lineno);
> + (*set_dcd_param)(imxhdr, dcd_len, cmd);
> (*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len);
> if (unlikely(cmd_ver_first != 1))
> cmd_ver_first = 0;
> @@ -436,20 +486,29 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd,
> break;
> case CFG_REG_ADDRESS:
> case CFG_REG_VALUE:
> - if (*cmd != CMD_DATA)
> - return;
> -
> - value = get_cfg_value(token, name, lineno);
> - (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len);
> -
> - if (fld == CFG_REG_VALUE) {
> - (*dcd_len)++;
> - if (*dcd_len > max_dcd_entries) {
> - fprintf(stderr, "Error: %s[%d] -"
> - "DCD table exceeds maximum size(%d)\n",
> - name, lineno, max_dcd_entries);
> - exit(EXIT_FAILURE);
> + switch(*cmd) {
> + case CMD_WRITE_DATA:
> + case CMD_WRITE_CLR_BIT:
> + case CMD_CHECK_BITS_SET:
> + case CMD_CHECK_BITS_CLR:
> +
> + value = get_cfg_value(token, name, lineno);
> + (*set_dcd_param)(imxhdr, *dcd_len, *cmd);
What I meant before was:
if (set_dcd_param)
(*set_dcd_param)(imxhdr, *dcd_len, *cmd);
and then
case IMXIMAGE_V1:
set_dcd_val = set_dcd_val_v1;
+ set_dcd_param = NULL;
> + (*set_dcd_val)(imxhdr, name, lineno, fld, value,
> + *dcd_len);
> +
> + if (fld == CFG_REG_VALUE) {
> + (*dcd_len)++;
> + if (*dcd_len > max_dcd_entries) {
> + fprintf(stderr, "Error: %s[%d] -"
> + "DCD table exceeds maximum size(%d)\n",
> + name, lineno, max_dcd_entries);
> + exit(EXIT_FAILURE);
> + }
> }
> + break;
> + default:
> + break;
> }
> break;
> default:
> diff --git a/tools/imximage.h b/tools/imximage.h
> index 36fe095..c199814 100644
> --- a/tools/imximage.h
> +++ b/tools/imximage.h
> @@ -42,19 +42,27 @@
> #define FLASH_LOADSIZE_SATA FLASH_LOADSIZE_STANDARD
> #define FLASH_LOADSIZE_QSPI 0x0 /* entire image */
>
> -#define IVT_HEADER_TAG 0xD1
> -#define IVT_VERSION 0x40
> -#define DCD_HEADER_TAG 0xD2
> -#define DCD_COMMAND_TAG 0xCC
> -#define DCD_VERSION 0x40
> -#define DCD_COMMAND_PARAM 0x4
> +/* Command tags and parameters */
> +#define IVT_HEADER_TAG 0xD1
> +#define IVT_VERSION 0x40
> +#define DCD_HEADER_TAG 0xD2
> +#define DCD_VERSION 0x40
> +#define DCD_WRITE_DATA_COMMAND_TAG 0xCC
> +#define DCD_WRITE_DATA_PARAM 0x4
> +#define DCD_WRITE_CLR_BIT_PARAM 0xC
> +#define DCD_CHECK_DATA_COMMAND_TAG 0xCF
> +#define DCD_CHECK_BITS_SET_PARAM 0x14
> +#define DCD_CHECK_BITS_CLR_PARAM 0x04
>
> enum imximage_cmd {
> CMD_INVALID,
> CMD_IMAGE_VERSION,
> CMD_BOOT_FROM,
> CMD_BOOT_OFFSET,
> - CMD_DATA,
> + CMD_WRITE_DATA,
> + CMD_WRITE_CLR_BIT,
> + CMD_CHECK_BITS_SET,
> + CMD_CHECK_BITS_CLR,
> CMD_CSF,
> };
>
> @@ -167,6 +175,9 @@ typedef void (*set_dcd_val_t)(struct imx_header *imxhdr,
> int fld, uint32_t value,
> uint32_t off);
>
> +typedef void (*set_dcd_param_t)(struct imx_header *imxhdr, uint32_t dcd_len,
> + int32_t cmd);
> +
> typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr,
> uint32_t dcd_len,
> char *name, int lineno);
>
V2 looks like much more easier to understand - apart the very small
comments, it is ok for me.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list