[U-Boot] [PATCH v3 0/3] This series implements fastboot on the "bcm28155_ap" boards.

[Lukasz Majewski]

Hi Steve,

> The OTG hardware is a DWC2 controller and this series uses the
> existing gadget driver ("s3c_udc_otg.c").
> 
> Changes in v3:
> - use static inline functions instead of macros
> - update the delay (2ms) to match the kernel code
> - use "SZ_1M"
> - undefine the 8-bit phy interface
> 
> Changes in v2:
> - rebased against u-boot-dfu
> 
> Jiandong Zheng and Steve Rae (2):
>   usb: gadget: bcm_udc_otg files
>   implement Fastboot via USB OTG on bcm28155_ap boards
> 
> Steve Rae (1):
>   g_dnl: add missing declaration
> 
>  arch/arm/include/asm/arch-bcm281xx/sysmap.h |  7 ++++
>  board/broadcom/bcm28155_ap/bcm28155_ap.c    | 40
> ++++++++++++++++++++++ drivers/usb/gadget/Makefile                 |
> 1 + drivers/usb/gadget/bcm_udc_otg.h            | 22 +++++++++++++
>  drivers/usb/gadget/bcm_udc_otg_phy.c        | 51
> +++++++++++++++++++++++++++++
> include/configs/bcm28155_ap.h               | 20 +++++++++++
> include/g_dnl.h                             |  1 + 7 files changed,
> 142 insertions(+) create mode 100644 drivers/usb/gadget/bcm_udc_otg.h
>  create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c
> 

Applied to u-boot-dfu (the whole series).

Thanks for patches!


-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group