[U-Boot] [PATCH 1/2] armv8: ls2085aqds: DSPI pin muxing configure through QIXIS

[York Sun]

On 06/26/2015 04:58 AM, Haikun Wang wrote:
> From: Haikun Wang <Haikun.Wang at freescale.com>
> 
> DSPI has pin muxing with SDHC and other IPs, this patch check the value of
> RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig"
> configuration, if those pins are configured to DSPI and "hwconfig" enable
> DSPI, set the BRDCFG5 of QIXIS FPGA to configure the SPI routing to on-board
> SPI memory. Otherwise will configure to SDHC.
> Enable DSPI in u-boot "hwconfig" using below command:
> setenv hwconfig "$hwconfig;dspi"
> 
> Signed-off-by: Haikun Wang <haikun.wang at freescale.com>
> ---

This set is applied to u-boot-fsl-qoriq master branch with subject fix.

York