[U-Boot] [PATCH v2 06/16] colibri_t20: add i2c support

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Add I2C support in order to subsequently allow disabling the PMIC sleep
mode on low supply voltage.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
 arch/arm/dts/tegra20-colibri.dts | 28 ++++++++++++++++++++++++++++
 include/configs/colibri_t20.h    |  4 ++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts
index bf14c6b..8eaac4f 100644
--- a/arch/arm/dts/tegra20-colibri.dts
+++ b/arch/arm/dts/tegra20-colibri.dts
@@ -11,6 +11,9 @@
 	};
 
 	aliases {
+		i2c0 = "/i2c at 7000d000";
+		i2c1 = "/i2c at 7000c000";
+		i2c2 = "/i2c at 7000c400";
 		usb0 = "/usb at c5008000";
 		usb1 = "/usb at c5000000";
 		usb2 = "/usb at c5004000";
@@ -52,6 +55,31 @@
 		};
 	};
 
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c at 7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c at 7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to PMIC and temperature sensor
+	 */
+	i2c at 7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
 	sdhci at c8000600 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index 82a887b..24880c3 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -23,6 +23,10 @@
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T20
 
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
 /* SD/MMC support */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-- 
2.4.3